High altitude equipment.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 26, 2014
Threads
80
Messages
1,412
Location
Tucson, AZ
Hello all. I have recently found out, much to my delight, that my vehicle is a high altitude variant. Sadly it was desmoged along with everything but the most essential vacuum lines. This included the HAC system. The up side is that it’s all in a box. I am piecing it all together but I still have a few questions.

-where does the plastic HAC piece get bolted down at?
-can you still get any of the system check valves anymore? -Are any of the fj60/4runner/truck ones compatible?

Any pictures or advice is greatly appreciated!

8595F7A9-DC2E-4BEA-92A3-D08B1883A9E1.webp


5B55EA44-239B-41C0-801B-10A735EAE779.webp


4A52EF4D-5B59-4AC7-8D1F-2FDFF0D1255F.webp
 
-where does the plastic HAC piece get bolted down at?

It's bolted to the top of the driver's side front fender on my (12/79 build) 1980. I'll get you a photo of mine later today when it warms up.
 
E854D65D-A048-4E2D-9C04-912BDD59F351.webp
Hello all. I have recently found out, much to my delight, that my vehicle is a high altitude variant. Sadly it was desmoged along with everything but the most essential vacuum lines. This included the HAC system. The up side is that it’s all in a box. I am piecing it all together but I still have a few questions.

-where does the plastic HAC piece get bolted down at?
-can you still get any of the system check valves anymore? -Are any of the fj60/4runner/truck ones compatible?

Any pictures or advice is greatly appreciated!

View attachment 1891904

View attachment 1891905

View attachment 1891906
I don’t have a good pic of my HAC but here is a pic of the late model 40 (1980?) at CCOTs shop.
 
There really isn’t a lot of info here on mud or anywhere else for that matter Pertaining to high altitude systems. I’m trying to get an applicable emissions manual.. so we will see. I’ll try to post what I learn so others can search it later.
 
Hello all. I have recently found out, much to my delight, that my vehicle is a high altitude variant. Sadly it was desmoged along with everything but the most essential vacuum lines. This included the HAC system. The up side is that it’s all in a box. I am piecing it all together but I still have a few questions.

-where does the plastic HAC piece get bolted down at?
-can you still get any of the system check valves anymore? -Are any of the fj60/4runner/truck ones compatible?

Any pictures or advice is greatly appreciated!

View attachment 1891904

View attachment 1891905

View attachment 1891906

My '77 rig is/was of the "High Altitude" variety. However, I have since taken all those components off when I desmogged it, see pic below. Being that I didn't need them here in Georgia, I boxed them up and put it on the shelf. Tired of seeing the box on my shelf, it sent the goodies to Valley Hybrids. Check with @orangefj45 to see if he has the "High Altitude" bits.

img_3282-jpg.1165360


Note, I still run the "high altitude" carb, and it sits on the rebuilt '86 2F in my engine bay.
 
E85D9FDA-2062-420B-8777-00B25069D1EE.webp
11233087-4CE0-429F-A032-E8B0380B1683.webp
@GA Architect yep.. I see the parts I need. I’ll have to look him up! Might you have any old pictures where it was installed?!
You need the circled bracket. The one in your orig post appears to be from another toyota model.
 
hmmm... @1911 now it looks like I have to much..

Mine is de-smogged, though I did retain the HAC.

PM me with an email address, and I will send you the 2F Emission Control Repair Manual that I have in PDF form.
 
Back
Top Bottom