Help Me...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

The speedo cable should be very easy to dissocnnect and reconnect. Mine had a habbit of binding and shearing them selfs. It also should not be all that taut. Find where it is binding try and feed it in a little from under the dash.
 
Hi,

There's a little tab latch on there on '79's .... made of nylon or something plasticy.

If you can get the instrument cluster out just a fraction, you can shine a flashlight in their and see the thing. Mine is always a booger to get loose. Not having much slack in the cable compounds the problem. You just have to futz with it a bit once you see how it works. Of course, you can disconnect it at the T-case and have all the slack you want.

john
 
sherwood thanks for the info... i will try.. what is the t-case... the gauges did come on the other day when i started the car and worked untill i turned the car off. i went to start the car a few minutes later and they did not come on again....thanks spencer
 
FREEDOM said:
what is the t-case...

t-case = transfer case...... attached to back of transmission. Transfer case provides the power to the front axle and low range gears.

Speedo cable is plugged into the t-case, where it is turned by gears off of the output.

Just follow the black speedo cable which comes through the firewall and runs down under the truck. You'll see it.

john
 
Transfer case - The knob to thr ight of the stickshift is for 4 wheel drive, that is connected to the transfer case
 
Try reaching under the dash, follow the cable up to the back of the Instr. cluster, grab the plastic"y" clip, squeeze the clip and rock the instrument cluster forward from the top. If it is like a 72 it may work without having to try the disconection.
Good luck.

You may want to disconnect the battery (that shock/live wire thing).

John
 
Back
Top Bottom