Help, Header Melting Everything

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 24, 2007
Threads
26
Messages
178
Location
SOUTHERN NEVADA
Ok, Heres my problem. I 02 i had the MAN-A-FREE 3FE Headers instaled on my 92 FJ80. Sense then the HEAT comming off those things has melted wires, conectors. But the biggest pain has been the heat killing ALTERNATORS, I JUST LOST MY 4TH MEAN GREEN ALTERNATOR. The heat is melting something in those, what ever is being melt runs out and rehardens underneth the Alternator (Black plasic )

So has any one else had or has this problem ??? The only thing i can think of is making a HEAT SHIELD around the Headers, Then putting a Air Scoop i the Hood or on the side like a Snorkel.

PLEASE HELP, THANKS GUYES,

LARRY
 
sorry to read about the trouble
 
Last edited:
just use an exhaust wrap? they work great although would paint the header before putting one on if you live in a rainy place

I totally disagree, wrapping the Header (holding the heat in) will melt the Header into smitherenies. Manufacturing a heat shield is the best solution.

My hunch is that either the Headers are extremely thin wall, or the vehicle is running lean as heck/hot as heck. Don't know if your Headers are still in good enough shape to justify the expense of ceramic coating. This process holds more heat inside the tubes (which lowers engine compartment temps), and also gives the Header much better longevity (thicker than chrome plating).
 
Man-a-fre headers are supposed to be ceramic coated... a simple heat sheild should solve your problems.

AAAARGH......yes I'm afraid those are crap. My freind had a 91 and put them on years ago. It melted e-v-e-r-y-t-h-i-n-g near it. Get it off asap.
airlaird
 
I'm surprised no one told him about the MG alternators....

OEM cruiser exhaust manifolds are said to be fairly efficient and reliable, as well as alternators. I'd stay away from MAF headers and ESPECIALLY Mean Green alternators.

I'm going through the same situation with my alternator, it's a P.O.S. non-OEM, I've been through 5 within three years, but no header-melting-things-under-the-hood going on.
 
Last edited:
Have you called Man-a-Free yet ?

I'm sure they would like to know about ' how their product is functioning in the field with customers...?
 
Larry,

Don't take offence here, but aftermarket headers on a 3FE have been melting engine compartments since the mid 90s. I think it was Jeff Jones who lost the accelerator pedal when his melted off the firewall (or something to that effect). The general consensus has been to go back to OEM headers as the gain in power is minimal and not worth the hassle.
 
I totally disagree, wrapping the Header (holding the heat in) will melt the Header into smitherenies. Manufacturing a heat shield is the best solution.

My hunch is that either the Headers are extremely thin wall, or the vehicle is running lean as heck/hot as heck. Don't know if your Headers are still in good enough shape to justify the expense of ceramic coating. This process holds more heat inside the tubes (which lowers engine compartment temps), and also gives the Header much better longevity (thicker than chrome plating).

so where does the heat go with a heat shield?

How is wrapping them different than coating them?

you say that holding the heat in will melt the header, but then say that coating them will hold the heat in......:confused:

People have been wrapping headers for a long time. Please explain yourself.
 
you say that holding the heat in will melt the header, but then say that coating them will hold the heat in

This is the way I read it... Coating them will hold the heat in, and by holding the heat in, they will melt.

Makes perfect sense to me :confused:
 
Yes they are CERAMIC COATED.
Yes i talked to Man-a-Free service dept. They sent me here to this Board for answers.

AND as i matter of fact, The Gas Pedel mount melted off the first summer after i had the Headers put on.


I'm at the point now that our 92 Cruiser is realy PISSING ME OFF, Had her toooo long now, just dont have the heart any more to do what she needs.:shotts:
lc1.webp
 
So, I am not sure what you are saying but, let me try...

they [man-a-free] sold you a set of headers, they new that they would have issues, on going issues, the product hasn't been improved to resolve such issues...

that is interesting.....

am I correct or is there something else going on....?

and did they tell you that there were issues about engine bay over-heating/melting of plastic and such when using their product......?
 
so where does the heat go with a heat shield?

How is wrapping them different than coating them?

you say that holding the heat in will melt the header, but then say that coating them will hold the heat in......:confused:

People have been wrapping headers for a long time. Please explain yourself.

Coating is on the inside, so there is a layer of insulation between the hot gas and the metal of the header. Wrapping is on the outside, so there is no insulation between the hot gas and the metal.
 
You know ""DOWNEY"", She has run Lean and Hot sense i had a custom Exhaust System instaled on her. The shop did say ""They got the O2 Sensors as close to the Headers as posable to keep them hot.

SO, WHAT MAKES THE ENGINE RUN LEAN, TOO HOT O2 SENSORS, OR NOT HOT ENOUGHT O2 SENSORS ?????? :confused:
 
Larry,

Don't take offence here, but aftermarket headers on a 3FE have been melting engine compartments since the mid 90s. I think it was Jeff Jones who lost the accelerator pedal when his melted off the firewall (or something to that effect). The general consensus has been to go back to OEM headers as the gain in power is minimal and not worth the hassle.



BINGO!

We have a winner..........:idea:
 
Back
Top Bottom