Wanted heater tube and brake parts

[kenai]

Location

United States

I need a good working t-case e brake for a 3spd. I don't need the backing plate or drum, but as long as the pads are okay and the hardware is there. Also i need a heater tube part, not the main big tube that runs from the blower motor, but the smaller piece that connects the main tube to the actuall heater core for a 69 fj40. thanks!

 

[shelfboy1]

if you cant find that rubber boot the later style 1 piece fits good and wont fall apart converted all mine no one knows except 1 or 2 diehard cruiser people

 

[el_diabolico]

if you cant find that rubber boot the later style 1 piece fits good and wont fall apart converted all mine no one knows except 1 or 2 diehard cruiser people

And all of MUD! ;p

 

[pappy]

I need a good working t-case e brake for a 3spd. I don't need the backing plate or drum, but as long as the pads are okay and the hardware is there. Also i need a heater tube part, not the main big tube that runs from the blower motor, but the smaller piece that connects the main tube to the actuall heater core for a 69 fj40. thanks!

FYI, that part is still available from Toyota. I don't recall how much I paid. Don't think it was that much.

 

[SteveH]

The rubber connector tube part is something like $38 from Toyota. I cut down an inner tube and carefully glued it together with the cement that come in a tire patching kit. I then zip-tied it around each end - works great and nearly free.

steve