Happy with this jack cradle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 3, 2014
Threads
11
Messages
38
Hey All. Nearing completion of a 4 year nut/bolt, frame off resto of my '77 FJ40. I don't post much but thought this bit of "custom" was fun and came out great. I scored, cleaned and painted a jack a while back thinking it was same or close to what came with a 40 as original equipment only to find out after receiving it is a double extension jack. Great for a higher jacking lift but longer than normal as far as mounting under seat/ Since I did not have the original bracket anyway, I made this from some scrap steel I have had for years. Happy with it wanted to share. I also modified and added the strap latch from an old fire extinguisher mount. Couple other recent pics too. Took this back to original. I do want to thank everyone for a great resource of info over the years. Heck - I hardly ever had to post a new question to the forum. I just Googled it and the past forum posts of similar answers were almost always there. I am getting proper exhaust this week as I fired the engine and have been test driving on a cobbled together exhaust. When all done-d-done I will post more pics. Thanks again All

jack cradle 1.webp


jack cradle 2.webp


jack cradle 3.webp


6-1-18.webp


6-9-18.webp
 
Wow what a huge accomplishment and classy looking resto. Great work on the jack.

A tiny detail I notice is your rig doesn’t appear to have the rubber bezel spacers. Not a biggie just figured I’d mention it. You can cut 4 small chunks of rubber fuel line. That’s what was in the kit I ordered from SOR.

Would love to see more pictures of your Journey.
 
Thanks Guys. Thebigredrocker, sharp eye! The bezel spacers they are there but maybe I trimmed em too much. The bezel seemed too far off the bib with them as they were. Main goal is to protect paint right? Here's a pic. Thoughts?
spacers.webp
 
I also assumed the spacers were to protect the paint. Wscbill posted they were added to to push the bezel as a headlight surround. He is very knowlegeble so I installed them.

The spacers allow the bezel to stand out from the front bib, so that it provides a surround for the headlights. Like this.
View attachment 1674596


When the spacers are missing or deteriorated, the bezel lies flat against the front bib, and the headlights stick out like eyes on a bullfrog.
View attachment 1674599
 
Back
Top Bottom