Can some one tell me how fat the 4 grommets are that attaches the bezel to the front bib? Is the idea the bezel should sit a certain distant from the bib?
Thanks for the help!
Thanks for the help!
Bezel bib grommets
- Thread starter karp68
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
The spacers allow the bezel to stand out from the front bib, so that it provides a surround for the headlights. Like this.
When the spacers are missing or deteriorated, the bezel lies flat against the front bib, and the headlights stick out like eyes on bullfrog.
When the spacers are missing or deteriorated, the bezel lies flat against the front bib, and the headlights stick out like eyes on bullfrog.
- Thread starter
- #4
Thanks guys for the replies. So my guess would be a 1/2" grommet would space the bezel about an 1/8" away from the bib?
They're thicker than regular grommets, wall thickness that is. And pretty firm rubber. You can still buy them new from Toyota.
53112-60010 superseeds to 53112-90300, click here
- Joined
- Nov 5, 2013
- Threads
- 60
- Messages
- 3,595
The bezel spacer kit I got was just chunks of fuel hose. Think it was from CCOT. Works fine, laughed when I saw it, was stuff I have laying around.
- Joined
- Sep 26, 2003
- Threads
- 117
- Messages
- 11,199
- Location
- Lancaster, Ohio, USA
- Website
- www.tlcperformance.com
Yep, that's what I use after seeing the new OEM part.
- Thread starter
- #10
Thanks all !!....I'm also installing some of Racer's led headlights, so I'm thinking I can move out the bezel a bit more, because the led's seem to stick out further and rubber fuel line would do the trick
i reopen this thread : print your spacers yourself 
www.thingiverse.com
FJ40 FJ45 HJ45 Landcruiser Headlight Bezel rubber spacer grommet by 86crumpy
FJ40 FJ45 HJ45 Landcruiser Headlight Bezel rubber spacer grommet. Print with TPU or similar. Solid Spacer.
www.thingiverse.com
Last edited: