Guage lights

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 14, 2004
Threads
26
Messages
127
Location
North Pole, Alaska
I don't know if any of you have this problem. When I drive after dark I can not see my guages at all. The lights are so dim that I can only make out the guage but not what they are reading. I put a new set of bulbs in. They did not make a change. I ordered a Ron Francis Wiring catalog and in it I found some bulbs that are 2 candle power and 3 candle power. The oem bulbs are 1 candle power. So when they get in I will give it a try and see if this does not shed some light on the matter.

The bulbs are called bright lites. The part # is 1016 (3 candlepower) and 1018 (2 candlepower). I will give an update when I get them in.

I gusee I shpould have said my czr is a 71 so the brighter lights that are in the mewer czr's will not work in my guage cluster.
 
i'm also running the factory crap bulbs with the shields removed...makes a heck of a difference. remove faceplate and you'll see them...just pryback and forth a few times and they'll break off.
 
Wagner 175L, 5 CP, drops right in, been running them for 1-2 years

I use these in my 40, they work great, not as bright as cutting the sheilds but I don't like them cut myself.

if your really sneaky you can get them in without pulling the cluster all the way
 
Thanks Degnol, Landpimp, and Nuc. I had not thought about that. The bulbs are already on the way. If the bulbs don't do the trick I will try removing the shields. Wish I has known about the wagner bulbs. Oh well 20/20 hind sight aint worth a damn. LOL
 
I don't know, mine is a 82

mxfj40 said:
I also have a 71 FJ40. I purchased some 175L lamps but arent the receptacles different in a 71.
 
You can also use the silvania # 2528 bulb, it's 5 watts. Twice as bright as the factory bulb and you dont have to remove the shields in the cluster.
 
Lashcat, the only complaint I've heard about removing the shields is the the bulb on the driver's side can glare into the eyes of the passenger. You might try bending as opposed to completely removing the shield. Personally, I say screw the passenger, what are they doin' lookin' over here anyway? I like the bright!

GL

Ed
 
that was Connie's bitch after I hacked the shields in the 45LPB.....I took a look and yup.....its anoying

Degnol said:
Lashcat, the only complaint I've heard about removing the shields is the the bulb on the driver's side can glare into the eyes of the passenger. You might try bending as opposed to completely removing the shield. Personally, I say screw the passenger, what are they doin' lookin' over here anyway? I like the bright!

GL

Ed
 
Its possible to get 5Watt Bulbs over here in Germany.
5w_halogen.jpg

12 Volt 5 Watt TYP W5W W2,1x9,5d


Another Option would be LED Lights, they are pretty popular here and should be even on ebay in the states.
LED_Auto_T10_Wedge_Bulbs.jpg

12 Volt W2,1x9,5d, T10

If anything look at : German Ebay
 
I treid a LED but was not impressed, about the same as the stock bulb, but this was just a 3 LED, seem some 5's that might work.


FJ40-GARAGE said:
Its possible to get 5Watt Bulbs over here in Germany.
5w_halogen.jpg

12 Volt 5 Watt TYP W5W W2,1x9,5d


Another Option would be LED Lights, they are pretty popular here and should be even on ebay in the states.
LED_Auto_T10_Wedge_Bulbs.jpg

12 Volt W2,1x9,5d, T10

If anything look at : German Ebay
 
I am not to worried about the passenger side. I ride solo about 99.9% of the time. The only time the wife to be rides with me is in the summer. Lights are not a issue up here because of the 21 hours of day light. I am doing this so I can see the guages when it is pitch black. I kept a flash light on the dash pad all winter. The biggest one that I watch is the temp. My 40 likes to run a little hot. It had not over heated but I still keep an eye on the guages.

No one wants to ride with except my son when it is -40. LOL He says it sounds like a race car.

I bet the led lights really brighten things up. I will keep that in the back of my mind for a later project, but I am not sure they will fit into my buage cluster. I will have to look at my parts catalog and see which year they changed things up.
 
You are right, the cluster is a pain to look in the dark. removing the shield like mentioned works or you drill a hole on the side of shield to give out more light in the direction needed. I have also painted them white(flat) so to reflect more light. Another trick is go with a light blue bulb....it actually makes white light. On one of my cruisers I used a greenish color one so it will match the backlighting on the stereo :rolleyes: . If your lighting is really bad don't have the time to modify it you may make sure that the battery terminals at both ends are making good contact. Yep I have this as well....and it helps a little.
 
mxfj40 I have not seen what the newer fj's guage lights look like but I think they are a plug in type of light. The older one's like we have use the bulbs that are like the ones in the turn signals you push and twist to lock them in place. I could be wrong but I have not got out my sor catalog to look.
 
New bulbs did the trick. I can even see the lights in the morning with the sun up.
 
Here's some info I got from the TLCA email barrage..... Seems like useful stuff.

From the SOR Catalog....

PIAA 168 Part # 19168

It's got H-151 on the box and is a 12v/5w bulb



Mark Baker aka Coolerman
2/71 FJ40 (not road legal yet)
http://tinyurl.com/47zpb (My FJ site)

Original Message
On Behalf Of Bullfrog
Sent: Thursday, April 21, 2005 8:25 PM
Subject: [LCML] Instrument Cluster Lighting Tip

Lost my oil pressure gage recently and decided to do a little r&r on the
cluster while I had it out for replacement. I did the instrument light
shield removal a few years ago but was still not happy with the lighting so
now I want to change light bulbs but to what? OEM is Yakazi #158 bulbs, as
my 78 FJ-40 has the Yakazi cluster. I found a useful bulb chart with an
internet search

http://www.danielsternlighting.com/tech/lights/signal_bulbs/signal_bulbs.html

According to the chart, the best replacement for #158 and #168 is #2825,
which offers twice as much candlepower, but only 60% of the life expectancy
of #158. It also draws about 60% more juice at .4 amp but I fairly
confident the old printed circuit board

can handle the increased load. If it doesn't, I'll let you know. I toyed
with replacing the #158 with #2827 for a nice amber glow but couldn't find
any in the local parts houses. The #2825 does fit in the bulb holder that
twists into the circuit board so that is not an issue. The bulb itself is
larger than the #158, and presumbably puts out a little more heat.

For the high beam indicator light, which is also an OEM Yakazi #158 I
substituted the #168, which increases the brightness by 50%, is a little
cheaper, uses a little less amperage, and is the same bulb size as the #158
but has 3 times the lifespan. Since access requires complete removal of the
cluster including detaching the speedo cable just to change the bulb, I
decided to make a lifetime maintenance decision, although I hope I'm still
around when this bulb expires...8^)

Anyway, HTH all those cruiserheads out there with diminished night vision.

Bullfrog

ps I also found some neon orange, white and black acrylic paint and a fine
point brush at Michael's, trimmed the brush to a point with just a single
hair and painted all the needles on the gages and the gage faces to brighten
them up as well. Attached the old gasket with some permatex sealer since it
tore when I took the cluster apart and taped and sprayed the face of the
cluster with Rustoleum Satin Black paint. The cluster now looks brand new,
all done in one day and good to go. Definitely a nice interior face lift
for those cruisers that are being kept in shape for the long term...
 
Back
Top Bottom