got it DONE!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 18, 2002
Threads
101
Messages
1,210
Location
Rosamond Ca.
After 5 months my rig moves by itself again :) Here is what I did: H41/Orion, boxed frame, Aqualu tub, tied cage to frame, made seat mount cradle, bumpstops installed, and some other stuff I ma sure I have already forgotten.
 
looks sweet got any more pics of the body ?
 
Only pix of it off the frame. Aligning the tranny hump sucked! I also had to rebuild the lower 8" of the cowl, as the rust monster took a big chunk out of it.
 
I was just curious if you sanded down the weldlines? I'm begining to wish I didn't and just accepted there excistance. I was messing with the aluminum tranny hump, and then ended up using my old hump it fit's like a charm. that aluminum on seemed to be to much work, I'm surprised they haven't fixed it. I am fortunate in that my cowl was in impecable shape. I was blown away when I got it back from the sandblaster. Anyway Looks good and impressive you got it done in five months.
 
I didn't do anything with the weld lines. I sprayed 3 galons of "duplicolor truck and bedliner inside and out. I did use a self etching primer, but it is still already flaking off. I am not surprised honestly.
 
sorry to hear that, I'm actually a bit fearful of that, Ive use epoxy primer and it was pretty scuffed up so we'll see, I can only hope. while working on the tub in the begining I did notice while spraying guide coats that on areas that haden't been scuffed it hada tendancy to flake a bit I guess it's one of the down sides of alluminum.
 
where did you get the little toyota emblem on the grill. its sweet
 
Oddly enough with the use of the Aqualu tranny tunnel, the stogk pedal bolted up like normal. later on I plan on using a custom Lokar Street Rod style I got off E-bay in anticipation of a problem.

Got the TEQ emblem from a vendor here on mud, and modified it to work in the grille. For the life of me I can't remember the vendor. It was a low volume deal if memory serves.
 
You don't have a picture of your pedals do you? I am having the hardest time trying to figure out a gas pedal with my aqualu tub. Thought I was going to have to go with the street rod pedal, but it doesn't even look like there is room for that.
 
A couple years ago I swapped to an FJ60 pedal with hand throttle, but other than the bracket and linkage for that, I didn't notice a difference.
 
The combo is really nice, and shifts smoother than I thought it would. Shifts better than the stock set-up honestly, but I don't know how many miles were on that. Low range is killer too. Not the lowest out there, but low enough for me....for now. Next year I'll throw in 4.88's.

Oh and I know the tires on there in the pic look tiny, but 37's are on order.
 
Back
Top Bottom