For Sale FST windshield channel

[65swb45]

Location

United States

$100 each, plus the ride.

 

[65swb45]

Found a third one.

 

[65swb45]

.

 

[KingAir Driver]

I'll take one.

 

[Martyt]

Me too Mark! Just left you a voice mail at your shop! Martin

 

[Martyt]

Mark, I will call your shop but do you happen to have the fuel line (carb to pump) for 3/69-9/69 carb? If you do and you want to sell it you can bring that down this month to San Diego with the soft top channel I will call you. Martin

 

[Voodoocruisers]

I’ll take one too please

 

[65swb45]

Mark, I will call your shop but do you happen to have the fuel line (carb to pump) for 3/69-9/69 carb? If you do and you want to sell it you can bring that down this month to San Diego with the soft top channel I will call you. Martin

Martin, I am basically sure I do not have that fuel line.

But I do have an NOS line for the 10/69-12/74, which shares the same orientation as the earlier. Because the inlet fitting is on the front of your carb, not on the inboard side like the newer ones, the line has a shorter reach.

I readily imagine that if you were to partially straighten out the two bends that take the line from the horizontal to the vertical and then back to the horizontal just before reaching the carb, making the vertical diagonal, it should reach your inlet.

 

[Martyt]

Mark, I will take the line— add it to your San Diego trip and see you in a couple of weeks.

 

[65swb45]

I'll take one.

You apparently work on the same timeline I do!

Thanks John.

 

[KingAir Driver]

Yep, totally forgot about this. Thanks again Mark.

 

[J40Fan]

I know it has been a while since the original post, but I will try just the same. Do you have anymore windshield channels for OEM FST?