FJ55 Rebuild and options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 9, 2003
Threads
13
Messages
49
Ok, I'm a newb when it comes to the 55's. I've been jones'in for one here as of late, and finally found a decent rig.

First off, the price. It's not in horrible shape as far as the body is concerned. Needs lots of work on the interior. Also needs work on the engine to get the thing running. What could one expect to pay for something in this condition? Let's just say average body with poor interior and poor drivetrain?????

Second, I understand that replacement parts n-such are hard to come by. Not to mention expensive. So is it near impossible to build a DD??? I don't want to dump a fourtne on this rig......... Anyone feel me here?

Third, I have a 72 K5 Blazer as a donor. SMC 350 and Auto Tranny. Are the axles useable?

Tell me what you think? I'm just lost here, but want a pig.

Jeremy
 
Just my opinion here,
Beat up wagon, barely running with a rat's nest inside, $1000-$1500.

Yes, it is expensive to fix one up, depending on the intensity of your plans. Also, rubber and weatherstripping are well, basically non-existant for someone of average riches. Interior is pretty cheap to do if you don't keep it stock. Rust repair is something to consider though, they get rust everywhere.

A lot of people run that drivetrain chevy combo with cruiser axles.
 
Places to check for rust on the '55. Drivers and passengers floorboards/firewall, rockers, seam under back seat, rear quarters, roof gutters (on the vertical area).
The frame of the '55's seem to be pretty tough and don't rust much compared to the '60's.
We were fortunate and were able to pick up our '55 free along with a donor body from another lister also for free. It's a good thing because the rest of the parts are HARD TO FIND.
 
most 40 series mechanical parts interchange, and are more reliable than chebby.
 
FJ55 for a Daily Driver

I drive a 74' FJ55 for a daily driver. It has a 350/Turbo350/Toy Tcase. If youre interested in a stock interior, let me know. I have a set of front and rear benches that are in great shape. I replaced them with buckets. I have redone my floorpans, Rhinolined the interior, and put down my own carpet. I fabed my own door panels from the old ones and am currently working on a new headliner. I have the numbers for universal door weatherstrip from JCWhitney that has worked perfectly. I massaged the dash for a new Kenwood CD/MP3 deck and have 6 1/2" 3 ways in the doors and 2 Kicker boxes under the back seat. I have step by step pics as I did the work and Id be happy to share them with you, as well as any relevant advice I have. I have been staying cheap as possible, since Im a full time student. Keep that Pig alive!! Hodag
 
DO IT!....I daily drive my pig on 35's no prob. No power steering either but I'm working on it. Like they said...rust is the biggest...on the 55 list people are starting to get some companies to make repo rubber parts...rear window rubber...door rubber can be substituted from an 80's Saab 900....very nice match... drivetrain is like 40's...

shameless picture whore posting...


The Daily Driver...

DSCN4135.JPG


DSCN4134.JPG
 
FJBen- Do you have anything to keep those Alcans from inverting? I folded one over before; the spring was fine, but it was a PITA.

Pigs are not that much more expensive, really. The only parts that start costing $$$ is springs, some interior parts, and the weatherstripping. Sheetmetal is a pain, but if you've got some welding skills, it's not a project that you cannot take care of.
 
Just bought mine a month or so ago and love it. It's not fully running yet, but I can tell you that if you pick up the rig for $1500 or so, you should expect to spend another $2k at least on getting it dialed in.

If you do your homework, you can get quality parts for not too much cash... but it's work finding them. I'm doing it and have spent almost $1k past the $1800 I spent for my rig... I've purchased disc conversion (4way) and rebuilt the top-end of the engine. Window rubber is by far the most difficult parts to find but there are universal replacements if you don't mind that... and I expect somebody to come up with near original replacements some day.

DO IT! THEY ROCK!
 
Here's my '69 FJ55 in Moab this year. Bought it a few years ago without an engine or tranny from a fellow club member. I've put a lot into it. Probably more than 10k invested. It's got a '78 2F, H42, Marlin 4.70 Toy Box, 3-speed xfer case, FJ60 P/S, Lock Rights front & rear, 4-wheel discs, 4" suspension lift, 33" BFG M/Ts, on board air, Dodge Caravan front bucket seats, custom sliders and skid plate. I had a lot of the rust repaired prior to Cruise Moab '05. :D

Go for it! They're cool. :cool:

Chris
PigPic.webp
 
Pigs are definitely cool. Rustbuckets, but cool. One day I'll find a clean one.
 
i used to hate pigs, but now i got the mother of all rust buckets in my yard. i want a clean pig
 
Here's a pic up close o' mine. Out of any of the mods so far, the springs were the most, MAF Safari's. But knowing what I know now, I would have gone with custom springs, like Alcans, or done a mild SOA with the stock springs. My plans are for a TBI on the 2F, put my SM 420 in, some 35's, some custom rear springs, and try putting the rear springs up front. I've had this rig for about 8 and-a-half years. It needed lots of help when I started driving it, but since it's not the daily driver, I can do the mods at my own pace, which is just way too slow. 10K to spend on it would make it my dream rig, but right now I prolly have about 5 or 6K into it, including the $2000 I paid for it. Oh and I've done all the work, so that keeps costs down. If I were paying someone to do the work, I'd prolly have 20k into it!!
 
Last edited:
Pigs are the coolest. I DD mine. Like it better than my stock 40. Been collecting spare parts for it ever since I bought it, 18 years ago. The parts are out there. I just picked up 7 complete Pigdoors. If you find a decent Pigbody, go for it. Drivetrains are easy to find, everybody puts buckets in anyway, dashcovers are cheap and who needs a headliner?
 
I need one of those forklifts, too, Pighead! Totally cool!
 
Dude!!

This would be a pretty good start, if one was looking for a FJ55:

http://cars.com/go/search/detail.jsp?tracktype=usedcc&se archType=21&paId=154338408&pageNumber=0&numResul tsPerPage=50&largeNumResultsPerPage=0&sortorder=desc ending&sortfield=PRICE+descending&certifiedOnly=fals e&recnum=10&leadExists=true&criteria=K-%7CE-%7CM -_47_%7CD-_428_%7CN-N%7CR-30%7CI-1%7CP-PRICE+descending%7CQ- descending%7CZ-80526&aff=national

Or if that link doesn't work, check out the thread on the Rising Sun board:

http://www.risingsun4x4club.org/forum/forum_posts.asp?TID=455&PN=1

Chris
 
Too bad it's in CO!!! I've located a few that I've made arrangements to look at this next week.

Thanks for the input guys. Keep it coming!! I can use all the knowledge I can get when making a knowledgeable purchase.

Jeremy
 
Back
Top Bottom