FJ Top Storage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2019
Threads
18
Messages
93
Location
Arizona
With ample assistance I intend to take the top off of my 78FJ 40 for its first time. Looking to take it off in its entirety. Wondering if it is safe for the fiberglass roof if this is stored upside down on roller Dolly’s with the roof taking the brunt of the weight? Also wondering if the bolt holding the fuel cover also connects to the strut? Nothing appeared to be connected to the street on the opposite side. I’ll likely just to be safe.
 
I wouldn't store it upside down on the lid. Maybe on the rear vertically, but not upside down.
 
There's a bolt on each side (back of each B pillar) meant to hold the post. Back them out most of the way and they'll clear the post.

I have always had to take my hard top off by myself, so I do it in individual pieces (doors, rear header, front door headers, fiberglass cap, sides). Then I just stand it all up against a wall in my garage. Of course, it's always easier with extra hands if some are available.
 
I have had my hardtop on it's roof several times with no ill effects. It will take the weight of the sides but is not ideal for long term storage. Mine is currently standing up in the corner of the garage. There is lots of padding underneath and I can store all 4 hard doors inside with room to spare. Someday I'll build one of those rollaway dollies but this works for now. Good luck!
 
If you choose to turn it upside down for storage, then I would support the side gutters with
2x6 or something. I'd be worried about the fiberglass 'popping' and cracking upside down.
 
If you choose to turn it upside down for storage, then I would support the side gutters with
2x6 or something. I'd be worried about the fiberglass 'popping' and cracking upside down.
Seemed a risk is why I asked. Appreciated your reply.
 
There's a bolt on each side (back of each B pillar) meant to hold the post. Back them out most of the way and they'll clear the post.

I have always had to take my hard top off by myself, so I do it in individual pieces (doors, rear header, front door headers, fiberglass cap, sides). Then I just stand it all up against a wall in my garage. Of course, it's always easier with extra hands if some are available.
I'll have to take a look when back at the vehicle in the am. I do not recall finding those bolts that might be holding the pillar on this 78 but may have missed them. There is a hole with a rubber cap inserted on the drivers side outside the pillar. A bolt heading into the post at or below the pillar on the passenger side holding - part of attachment of the cover for the fuel filler. This thread has me convinced to take the top apart. This roof not likely to go back on while I own this one.
 
I have had my hardtop on it's roof several times with no ill effects. It will take the weight of the sides but is not ideal for long term storage. Mine is currently standing up in the corner of the garage. There is lots of padding underneath and I can store all 4 hard doors inside with room to spare. Someday I'll build one of those rollaway dollies but this works for now. Good luck!
Appreciate the consensus.
 
Here's a thread with a compilation of hardtop storage ideas.

Super helpful. If I was thinking of on and off this would be imperative. I have the good fortune of having a 78 restored and leaving the top on for that one and now this new project, another 78 that will be more of a patina car and full time top off.
 
There's a bolt on each side (back of each B pillar) meant to hold the post. Back them out most of the way and they'll clear the post.

I have always had to take my hard top off by myself, so I do it in individual pieces (doors, rear header, front door headers, fiberglass cap, sides). Then I just stand it all up against a wall in my garage. Of course, it's always easier with extra hands if some are available.

that the current plan thanks to this consensus of idea. thanks
 
Back
Top Bottom