Father Son project

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 15, 2018
Threads
7
Messages
39
Location
South Placer Co
Hi all, I'm new to the FJ 40 world, just picked up a 1965 FJ. for my son and I to work on. Wheels are spinning a little as I've never rebuilt a vehicle. This is a complete frame off project. It has the inline 6 and 3 speed, but that will be replaced with a vortex and auto transmission. Seems like upgrading the birfields axles is a must. Gonna run leaf over w/ 35s. Dan from Roughstuff recommended this site, and said there's some good info for the leaf over relating to camber.

I'm gonna use the vehicle for light wheeling, rubicon, but mainly to drive around town, as well as track my dirt scoot to the track. I'll post some pics later, but I'm really excited for this build. I've wanted an FJ 40 for a long time, and getting to work on it with my boy is gonna be great.
 
20180114_140826_HDR.webp
20180112_175017.webp
 
Great ! Welcome to the madness !!


:cheers:
 
Hi, Looks like your going to have plenty of fun with your son. Personally I'd go no more than 33s for in town driving and skip the spring over ,the cruiser already provides a less than stellar ride. You'd also have less trouble with spring wrap. Have fun. Mike
 
Curious about your stock engine. Sent you a PM.
 
Engine came out today. Need to lift the body off the frame so I can get started. I am contemplating coils as I want my cruiser to drive nice. If anyone has some feedback, I'm all ears. Also, was thinking about fuel tank relocation. Again, if anyone has experience with that, I'd welxome your wisdom.
 
Very close to having the frame stripped down (1 axle left). This FJ was originally a farm vehicle. The rear cross member has a verticle crack. Someone attempted a repair by adding a plate. Also, it looks like the C Channel was repositioned to add a hitch.

Gonna send this out to a friend while Im waiting for my lift. I went with the Old Man Emu with medium springs.

I will be working on the axles, while the frame is being addressed. Going to upgrade the brakes to disc's.

20180210_203736.webp


20180206_181912.webp


20180206_182122.webp
 
Message_1543537387546.webp


It's been a while. Project got set back due to a car accident. Picked the 5.3 Vortec and 4l60 up yesterday. Just need a transfer case and I'll be ready to install the motor mounts.

I've been reading a bit about the FJ's being hot box's. I'm gonna rhino line the undercarriage. Seems like headers cause a more issues, and I noticed the stock exhaust manifolds have heat shields. Anyone have expeience with leaving the stock manifolds on? Do they angle downward enough?
 
View attachment 1843539

It's been a while. Project got set back due to a car accident. Picked the 5.3 Vortec and 4l60 up yesterday. Just need a transfer case and I'll be ready to install the motor mounts.

I've been reading a bit about the FJ's being hot box's. I'm gonna rhino line the undercarriage. Seems like headers cause a more issues, and I noticed the stock exhaust manifolds have heat shields. Anyone have expeience with leaving the stock manifolds on? Do they angle downward enough?
a 5.3 seems like a nice v8 for a 40. I'm going for a 4.7 toyota 2uz in mine at some point
 
Back
Top Bottom