FACTORY E- LOCKERS NEWBIE

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 14, 2016
Threads
8
Messages
56
Location
Manassas, VA, United States
Hello again fellas! I've owned my 80 series cruiser for about 2 months now and I love it. just did a few things to it maintenance wise as well as cosmetics. got my windows tinted, installed a new Pioneer Head unit, did all the interior lights LED, changed a few fluids here and there etc. and also fixed the annoying exhaust leak she had and actually feels peppier. overall I'm happy with her. I also am in the process of installing my CDL switch but my factory front and rear diff. lockers aren't working. the light flashes in the dash and that's it. my question is how can I try and diagnose if they are bad, or maybe they need to be exercised. any tips on what to do? any help or input will be greatly appreciated

thanks in advance
 
Start with some open space (rocky and/or dirt)where you can drive in figure 8s.
 
I believe the center diff has to be locked for them to engage. Try putting it in 4 low to engage the center diff and see if they lock.
 
Last edited:
Center diff does need to be locked to engage front and rear lockers. Definitely find some dirt and do figure of eights until they engage - you'll notice they do by the feel of the truck and the if the lights in the dash are working properly they should stop blinking and stay on.
 
If you do a search here on MUD there are a ton of threads on this very problem, plus i think there's is a sticky on this too.
 
Definitely try the figure 8 method should work. But only do it on dirt or something loose. try the rear first, you can shift from reverse to forward moving back and forth while turning and you should feel it engage with the inner rear tire on a turn scampering about. then try the front if it engages steering will get really firm and when you do turn the wheel should bring itself back (resisting the turn). The dash lights are temperamental sometimes, when i test drove my rig the axle lock lights would flash even though they were engaged but the cdl light would be solid. Just play with it, they should engage.
 
I will definitely try the figure 8 method. just gotta find some loose dirt around Northern VA and do it... that can be the hard part... there's nothing around here lol
 
Back
Top Bottom