Early Running Boards

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 20, 2016
Threads
27
Messages
251
Location
The Old Dominion
I'm trying to score an early 40, mostly as a parts vehicle. The body panels are not just corroded but are rotten. Looks like the hard top is pretty decent so if I get it at a fair price, I'll snag it because it's all there.

I noticed that the poor old rig has the older style running boards that use the rubber insets. The running boards appear to be in darn good shape minus the rubber. The boards are certainly restorable. So what years were these style boards used on? Are these more sought after that the all steel?
 
It would be ironic as all get up if your parts rig had a Vader light and a hand throttle.
 
It would be ironic as all get up if your parts rig had a Vader light and a hand throttle.


Are they really that hard to find? Going thru my old cables think I have more throttle cables than choke cables. But that was a few months back when I transport them to another location for safety reasons.

Probably should mention the light and wiper switches. I've read those are getting rare too.
 
Are they really that hard to find? Going thru my old cables think I have more throttle cables than choke cables. But that was a few months back when I transport them to another location for safety reasons.

Probably should mention the light and wiper switches. I've read those are getting rare too.

My statement is based solely on my observations of what @Martyt has been going through on his ‘69.
 
My statement is based solely on my observations of what @Martyt has been going through on his ‘69.

68-70 parts, he was looking for are different. Might have had some from my 68 but pulled them off thirty-five years ago when I put in 74 bucket seats and update the knobs/switches from a 78. Believe I was running a Holley at the time and hand throttle wouldn't work.
 
I had a hard time finding the throttle cable that looks like a choke cable (not boxed in version) and with the dashes (dots) at bottom to depict fuel being atomized. I found one--a new OEM one that Ashot was able to track down for me--cost more than any knucklehead except me would spend. I did get a seat handle in the package--ya, that was an outrageous amount of money too--again, only an impatient person like me would pay.
 
I had a hard time finding the throttle cable that looks like a choke cable (not boxed in version) and with the dashes (dots) at bottom to depict fuel being atomized. I found one--a new OEM one that Ashot was able to track down for me--cost more than any knucklehead except me would spend. I did get a seat handle in the package--ya, that was an outrageous amount of money too--again, only an impatient person like me would pay.

Was your seat knob on the other side hollow or solid? My 7/67 68 model were solid. My 10/69 70 model are hollow. In 95 picked up two 69 model frames and tubs along with other parts. No seats that I can remember except possible rear jump seats. Both are long gone but may have stripped the dash of one or both was a long time ago. To show how things have changed this was all free. One tub was rust free and traded it for parts along with a frame. Other one had a rusted sill and few other areas underneath and cut it up for scrap metal. If I have more space at the time might have held on to it. Still have the other rust free frame. Frame I know right where it is. All the same parts are buries away. Sell a few cruiser and will have space to look for parts.
 
Mine are solid John and mine is a 4/69 BTW, I know a guy who has an OEM PTo in the original crate— that would cost a fortune! Hope you are up at your mountain home today— Phoenix is pretty warm:)
 
I'm trying to score an early 40, mostly as a parts vehicle. The body panels are not just corroded but are rotten. Looks like the hard top is pretty decent so if I get it at a fair price, I'll snag it because it's all there.

I noticed that the poor old rig has the older style running boards that use the rubber insets. The running boards appear to be in darn good shape minus the rubber. The boards are certainly restorable. So what years were these style boards used on? Are these more sought after that the all steel?
Post a picture when you get a chance.
 
85EB1EAE-224A-48F9-A2A3-120F1EEA0768.webp
Here is a pix of my 4/69 running board— I don’t know if the rubber is correct— am sure someone will chime in.
 
Are they really that hard to find? Going thru my old cables think I have more throttle cables than choke cables. But that was a few months back when I transport them to another location for safety reasons.

Probably should mention the light and wiper switches. I've read those are getting rare too.
Switches not such a rare bird now with all the new NOS ones people picked up recently.
 
I'm trying to score an early 40, mostly as a parts vehicle. The body panels are not just corroded but are rotten. Looks like the hard top is pretty decent so if I get it at a fair price, I'll snag it because it's all there.

I noticed that the poor old rig has the older style running boards that use the rubber insets. The running boards appear to be in darn good shape minus the rubber. The boards are certainly restorable. So what years were these style boards used on? Are these more sought after that the all steel?
When you post pictures of your running boards, show the bottom side.
 
Back
Top Bottom