driving in low range.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 4, 2009
Threads
88
Messages
598
Location
England
had to pick up a heavy load today, 4.2 tonnes and the trailer weighs about 600 kg. it was saturday so town was really busy, a lot of stop start driving. so i put the bruiser into low range to give the clutch a break. in the end i drove the three miles home in low, in top gear doing about 30 mph.

i often use low to hook up the trailer, manouver in tight spaces or towing up steep banks. but never for an extended amount of time nor in top gear.

so my question is really, is this a bad idea? am i putting the old girl under too much stress?

oh and the CDL was obviously disengaged.
 
That's what puts the U in SUV. Your fuel mileage will suffer, though. Isn't it great having such a versatile vehicle? It just tickles me how all the environmentalists and people pushing their "green" agendas shut up when it snows or they need a ride in a snowstorm or when a tough job needs to get done that only an SUV can do. Go ahead and give your 80 a challenge, it's prolly up to the task! :D
 
Alright, I was just thinking and I may be off, but isn't the weight chapel gate was towing today far exceeding the towing capacity for an 80 Series? He said 4.2 tonnes (8818.5lbs) and the trailer weighing 600kgs (1322.8lbs), that comes out to over 10000lbs. The rated capacity for the 80 is what....5000lbs. So he is towing twice the rated capacity of an 80. That seems to me that it would really put a strain on the truck. I am not really familiar with 80 Series from overseas, so I may be off base here.

Not questioning anyone's response, just looking for clarification.
 
thats good to hear, just didnt want to over stress anything with all that extra torque.

the trailers braked, so that helps. even though its a "little" overloaded ;)

i did have a sketchy moment once though when i stalled it :doh: on a very steep hill as the brake doesnt work in reverse....

versatility is why i chose the bruiser! i dont off road her as such but it gets me out in the snow in winter (i live in a rural area), takes all of my tools in the back and materials in the trailer for work, great for going mountain biking with the lads, or cruising down to the south of france with the girlfreind! good for sleeping in too..
 
if what you say is correct 94 i think over twice the load is pushing it a bit...

is this limit for the safety of the truck or just road legeslation(sp)?
 
Good call, 94SRUNNER. I wasn't paying attention to the weight. Yes, chapel gate, you MUST pay attention to the specified weight limitations that Toyota has. And it is both for your safety and the safety of others. You want to be able to maintain control of your vehicle at all times, starting and stopping!
 
chapel gate, I am not sure if it is a limit of safety or a government rating. I believe we would need some with a greater knowledge base about the trucks. Beowulf probably has some good incite on the matter. I would be interested to know as well.
 
Alright, I was just thinking and I may be off, but isn't the weight chapel gate was towing today far exceeding the towing capacity for an 80 Series? He said 4.2 tonnes (8818.5lbs) and the trailer weighing 600kgs (1322.8lbs), that comes out to over 10000lbs. The rated capacity for the 80 is what....5000lbs. So he is towing twice the rated capacity of an 80. That seems to me that it would really put a strain on the truck. I am not really familiar with 80 Series from overseas, so I may be off base here.

Not questioning anyone's response, just looking for clarification.

No biggie but my understanding of a tonne in England is it's 1000kg. That means that 4.2 tonnes is actually 9240 lbs (which is a lot of weight!). Again, doesn't distract from the argument at hand but thought I would clarify (of course I could be wrong)....still comes out to well over 10000 lbs.
 
Beowulf probably has some good incite on the matter.

The 5,000# rating is US and probably has more to do with our litigious society than limitations on the truck. IIRC, the european rating is 7,500# but that should be checked.

The OP was asking about over-stressing his (diseasel) vehicle towing a heavy load for 3 miles. I don't think that was over doing it as long as he had adequate braking... which he did with the trailer brakes.

-B-
 
Excellent use of your low range and the very reason why I love the pin7 mod.

My understanding of towing weight limits is that it has something to do with torsional stress on the chassis. For that short distance at such low speeds, I don't think it matters. You definately don't want to be pulling that kind of weight in high gear because of the stress on the tranny.
 
Isn't it more of a braking issue than anything else? Definately one of the weakest designs on the 80 is the weak brakes, thats one of the reasons we do the 100 pad trick.
 
thanks for the replies, ill look up the 100 pad trick, although the brakes never struck me as being that bad, apart from the terrible handbrake!

happy towing!:D
 
Properly adjusted, the handbrake works very well. There are several threads on what is needed to keep it in good working order. Do a search on bellcranks.
-B-
 
The odd and incorrect feeling that the 80 has brake problems is complete fallacy. Properly maintained stock 80 brakes will stop the Cruiser in a 'best in class' manner. I recall a test when they were in magazine reviews where it outstopped vehicles weighing over a ton less, and I think it stopped from 60mph within a few feet of the Camry sedan. People complaining about it are driving poorly maintained brake systems.

In my final criticism of this issue, the 100 series pads absolutely, unquestioningly DO NOT stop the 80 faster. Ludicrous.

DougM
 
beowulf, just looked at some of the handbrake threads, theres some good info. every year come MOT time i would have to adjust the handbrake to pass, and then sure enough the following year i would have to adjust it again.

i used to adjust it up according to the manual, no mention of the bell crank...

like i said, i dont have a problem with the braking on the 80, and i just use aftermarket pads and disks.
 
Back
Top Bottom