Draw-Tite Hitches...beware

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 16, 2008
Threads
13
Messages
109
Location
MO
I'll let the pictures do the talking:
1.JPG

2.JPG

3.JPG


Be sure to check yours!!!

BTW: The 80 frame is in good shape, just light surface rust in spots.
 
Napeleon...where on this fine planet are you? Somewhere salty I'm sure!
 
Don't rag on Draw tite too much, my OEM hitch looked worse than that.
 
IF you live in salt, its gonna happen. I have my hitch from the day I bought the truck. 11 years and there isn't a hint of rust. Helps when you live in L.A.
 
I have a draw-tight hitch on the back of my FJ60 that came with the truck from the dealer in 1984 and it's perfect. That is not an issue with the hitch, but where you live. Fortunately, no salt here.
 
Yeah I think the MOD GODS need to change the title to read "beware of hitch rust in salt prone areas" instead of bashing Draw-Tite specifically.
 
Yeah I think the MOD GODS need to change the title to read "beware of hitch rust in salt prone areas" instead of bashing Draw-Tite specifically.

No. If Draw-tite had used a quality finish, the hitch would not be in this condition. The frame of the truck does not look like this and its been in the exact same environment.
 
No. If Draw-tite had used a quality finish, the hitch would not be in this condition. The frame of the truck does not look like this and its been in the exact same environment.

Um, I've seen ALL hitch manufacturers rust. Ok all that were available to be seen at the time. If you live in salt prone areas IT WILL RUST. I don't care who makes it or how good the powdercoating is.
 
Towing while it came off? good info to have. I'll double check mine! :cheers:
 
I lived in salty Michigan, something similar happ'd to me, and I sent the pics to Draw-Tite. 6 days letter I had a new hitch unexpectedly on my front doorstep along with a letter thanking me for being a customer. Have you given them a chance to make this right yet?
 
No. If Draw-tite had used a quality finish, the hitch would not be in this condition. The frame of the truck does not look like this and its been in the exact same environment.

This is complete and udder BS. You're basing your opinion of the 'quality of the finish' on one exemplar.

I could draw the same conclusion about my OEM hitch then, couldn't I? Toyota obviously makes low quality finished goods then too, huh?

FWIW- My OEM hitch had completely rusted through in the wings, at least you had one that was at least semi-solid still.

Salt is your enemy, not the hitch, not the finish, not the installer.
 
I had a bit of surface rust where the powdercoating had separated (as is often the case with darn powdercoating of various provenances it seems). Nothing structurally damaged like the above of course, first because I'm in SoCal and second because I am under the truck enough that I would have noticed well before it ever got to be that bad.

I don't think DrawTite is to blame much for this. Any steel will eventually rust if wet and salty and not maintained properly.
 
Back
Top Bottom