Ditch lights

[RFB]

So I just installed a set of rigids on yota tech brackets Im fishing the wire thru the door, my question is what the best way to get wire from inside the door into the cab? Im looking under the dash and theres a lot going on on drivers side, I want to do this right and Once. lil help.

 

[jfz80]

Not having done it seems id follow the factory sleeve with grommets if there was room to push/pull another wire through.

Ive seen folks drill new holes and ad rubber grommets

 

[NLXTACY]

Ive seen folks drill new holes and ad rubber grommets

That's what I did.

 

[RFB]

That's what I did.

LOl, glad to hear it, cause I did it about 15min after posting, couldnt find any other way.

 

[Pascoscout]

I cut a very small slit in the factory grommet and zip tied the new wire to the factory stuff.

 

[Irish Reiver]

I did the factory gromet slit thing as well. Worked a charm. Took me a few attemps to figure out the order of things at the bracket/light end - it was like an IQ test i kept failing.