Diff lock ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Using a front locker without a rear is a good way to bust the weaker front diff. Also not so great in most off road situations since you will lose most of your ability to steer in exchange for the added front traction (usually rear traction is needed more than front).

I agree with @Tools R Us , a rear autolocker (aussie, lock right, spartan, etc) would be a great compliment to a selectable front diff. Get the rear first before you bother wiring up the front.
 
Just a thought.............have you driven the vehicle with the centre lock engaged? I ask as you would not be the first to engage the CDL and find your 80 apparently glued to the floor. The reason being an axle change that has the wrong ratio being fitted, you mentioned the previous owner not being mechanical savvy so.............

Make sure all is good there before moving on.

Regards

Dave
 
Just a thought.............have you driven the vehicle with the centre lock engaged? I ask as you would not be the first to engage the CDL and find your 80 apparently glued to the floor. The reason being an axle change that has the wrong ratio being fitted, you mentioned the previous owner not being mechanical savvy so.............

Make sure all is good there before moving on.

Regards

Dave

There is only one diff gear ratio available here, could have aftermarket gears but unlikely. A 93 should be AWD, with a VC, so if driven at speed with differing ratios, will bind/lockup, BTDT.
 
There is only one diff gear ratio available here, could have aftermarket gears but unlikely. A 93 should be AWD, with a VC, so if driven at speed with differing ratios, will bind/lockup, BTDT.

Agree, I am not familiar with your options, here the autos and manuals have different gearing, really funny watching one try to pull away as the front and rear axles are fighting each other. Owner scratching his head as was I, thinking it was a transfer case issue.

Regards

Dave
 
Agree, I am not familiar with your options, here the autos and manuals have different gearing, really funny watching one try to pull away as the front and rear axles are fighting each other. Owner scratching his head as was I, thinking it was a transfer case issue.

Regards

Dave

It's even more funny with the VC, drives fine at low speed, pull onto the highway, get to speed and the tires lockup! :doh:

The front locker harness is P/N 82164-60013.
 
Using a front locker without a rear is a good way to bust the weaker front diff.

If you flog it like a red headed step child maybe.
They aren't made of glass.
I've had my front selectable separately for a long time, and occasionally use it without rear locker.
Treat them with a little care, be careful not to shock load it, particularly in reverse, but they don't need to be babied IMO

Also not so great in most off road situations since you will lose most of your ability to steer in exchange for the added front traction
Change "most" to "some" and I agree. A lot of the time, you're using a locker in a low traction situation, if your wheels are rotating, and you have some wheel slip on at least one wheel, steering is usually no real issue. On good traction surfaces, clean rocks, it can be a bitch.

(usually rear traction is needed more than front).
Yeah, I agree.
But there is many times when momentum is lost with no lockers, and having a little assistance from any locker is enough to get you past an obstacle and keep moving. Again, its there, why not make it active and use it.
 
Back
Top Bottom