Diesel 80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 23, 2004
Threads
13
Messages
28
We have a '96 Cruiser, and I think I would rather invest the money in having it converted to diesel than getting rid of it and purchasing one of the Diesel SUV's on the market. So my question (well wife's concerns) what should we expect to pay if we were to have someone do the swap, and once the diesel and 5spd are in, what kind of economy should we expect from the rig? Any and all responses are greatly appreciated. We have been doing some searching, but hoping someone has some of these answers.

Frode
 
This is based only on reading MUD and looking into it myself for a 62... all of these shops have experience and great reputations:

Proffitts Cruisers- 4BT and 1HZ/12HT + H55 conversions $8-12K
http://www.proffittscruisers.com/

Radd Cruisers-
http://www.raddcruisers.ca/

TLC- International 2.8L + Atlas T-case + NV4500 5 spd $36K (this isn't as unreasonable as it seems; their work is amazing I think)
http://www.tlc4x4.com/

Hopefully someone with real experience can give you more.
 
I have read a lot of good things about Proffitt Cruisers. They use mostly 4bt's and they require at least 4 in of lift to fit to clear the engine oil pan.
There are several threads on their conversion and they just updated their website not to long ago.

Here are some links that have info about fuel economy and price.
https://forum.ih8mud.com/showthread.php?t=119996

https://forum.ih8mud.com/showthread.php?t=96454&highlight=4bt

price estimate
http://www.proffittscruisers.com/diesel/cummins/sample_estimate_FJ80.htm
 
Last edited:
We have a '96 Cruiser, and I think I would rather invest the money in having it converted to diesel than getting rid of it and purchasing one of the Diesel SUV's on the market. So my question (well wife's concerns) what should we expect to pay if we were to have someone do the swap, and once the diesel and 5spd are in, what kind of economy should we expect from the rig? Any and all responses are greatly appreciated. We have been doing some searching, but hoping someone has some of these answers.

Frode

you should really examine how long it will take you to recover the $10,000+/- it's going to cost you, and exactly how many mile you'll drive before you start saving money.

I'm in the same boat, I'd like to diesel my Cruiser, but my research came up with a very prohibitive cost. Getting in to a used Toyota diesel 6-banger, installed, would run me $8K at best.
 
So Profitt's Cruisers estimate is ~$21k. So, apparently, you do it because you want to, not because it makes financial sense, unless, you can source parts really cheaply and can do the conversion by yourself...
 
That $21K estimate is high. You can get a half-cut for $8-10K, which has all of the parts that add up to be so much for the swap priced on the above link. So, expect to pay $8-10K for the engine and parts, and up to $5K for installation.

I am looking at doing the same thing for the same reasons. Diesel isn't going where, and I am actually hoping to run bio-diesel in a 1HD-T. So, let me know if you pull the trigger.
 
That $21K estimate is high.

No, that $21K estimate looks extremely accurate to me. Did you read it?

One of the big ticket items in that estimate is for the remanufactured Cummins 4BT engine and the reman'd transmission. Those are basically new components that your "half cut" does not include.

It also includes ~$2500 for the 4" lift that is required for the 4BT. Using a Toyota engine would not require the lift.

I believe the employee from Proffit's has said in the past to expect the total to be in the $12-14K range, including 4" lift, with a used 4BT. Less if you supply the engine from one of those Frito-Lay pulls. (See Dovebid.com)

-B-
 
If you check out the site, you'll see that Proffitt's is no longer doing the conversion with used engines, only their sourced units or Cummins remanned. I think this is one of the major factors that has raised the price above the previous $12-14k quotes, which is too bad. It is now priced out of what I consider a semi-reasonable range.
 
If you check out the site, you'll see that Proffitt's is no longer doing the conversion with used engines, only their sourced units or Cummins remanned. I think this is one of the major factors that has raised the price above the previous $12-14k quotes, which is too bad. It is now priced out of what I consider a semi-reasonable range.

We have had a few problems with finding good used engines lately. Seems that everyone is wanting a 4BT now-a-days and suppliers know this. We used to be able to get decent engines for around $2K-$3K. Now, crap ones (needing a rebuild) are selling for that.

Needless to say but, anyone looking to do a 4BT swap and wanting to source their own engine, should find out as much as they can before they buy the engine. Lots of crap out there.

We are finding that a reman'd engine is the way to go. You get a Cummins warranty and everything is brand spankin' new. If it is well taken care of, you are good for about a 1/2 million miles or maybe more.

Good luck to you.
 
Hey guys, G&S Cruiser outfitters does the conversions up here in Canada. They replace the gas version with a 1HD-T. It is perfect. But again, gonna be in the higher end of the #'s on here.
I drive a diesel 1HD-T. 26mpg, torques over anything at 1400rpm.

If you are serious, these guys do a great job.
g
 
But again, gonna be in the higher end of the #'s on here.
There are a lot of prices posted "on here."

Are you talking the higher end of the $21k estimate for a reman 4BT from Profitts?

-B-
 
26 mpg is going to be IMPERIAL mpg...more like 21 US mpg.
 
Back
Top Bottom