Delta Vehicle Systems goes to Overland

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Awesome you guys made it!! I really wonder if you could pull it off when I was at the shop last, ton of work you guys did in 10-days!


I got an HDJ81 over here, it has the H151 in it that is coming out. At some point I will bring it over so you guys can get what you want measurements wise off it. I am starting two big builds on HDJ81's, the first one showed up yesterday. Stop by anytime if you want to check it out.

The Cruiser looks killer by the way!

Cheers
 
Nice 80 attic rack. I just bought your brackets, didn't realize you were offering a complete one peice unit. Are these available now? Did not see on website when I ordered brackets.
 
Nice 80 attic rack. I just bought your brackets, didn't realize you were offering a complete one peice unit. Are these available now? Did not see on website when I ordered brackets.

Just got put up in the site last night. If you’d like to upgrade/trade in I’m sure we can figure something out. They will ship as soon as we get back to Idaho. We have 8 left here at the show.
 
Awesome you guys made it!! I really wonder if you could pull it off when I was at the shop last, ton of work you guys did in 10-days!


I got an HDJ81 over here, it has the H151 in it that is coming out. At some point I will bring it over so you guys can get what you want measurements wise off it. I am starting two big builds on HDJ81's, the first one showed up yesterday. Stop by anytime if you want to check it out.

The Cruiser looks killer by the way!

Cheers

We would be VERY happy to measure that thing up!
 
Another gratuitous engine bay shot for no reason

View attachment 1704606


Next generation of our CSB (ceiling storage brackets). Decided to make it a full, once piece product. We will still offer the CSB so folks can easily make their own shelf system using whatever material they choose. The CSR (ceiling storage rack) option has a bulkhead in the front that closely follows the curvature of the headliner so it's a bit safer than just a kitchen shelf up there. It also offers plenty of attachment points for securing things above and below the shelf. Off to the left side of the photo, you can see the DVS tool pouch. There will soon be quick attachment points under the rear slider to secure the bottom of the pouch so it doesn't swing when you turn left or slam into the wall when you dodge chickens in the road.

View attachment 1704607


DVS center console with adjustments from last time it was posted. Can't see it in this shot, but the angles on the lid are way shallower and there are now breaks on the sides of the front pocket so you have to try way harder to skin your knuckles when operating the e-brake or digging for lost Cheetos. Not seen in the previous post about this product is the stand-off plate you can just see the top of here. This allows for easy strapping/bolting of whatever you want to the inside. There will also be inserts that fit snuggly into those triangular cutouts with holes for mounting holsters, etc. Seen in this pic is a full width plate, there will also be half width plates available.

View attachment 1704608


The paint job has not been finalized yet (no cut and polish yet, have to wait a month for everything to cure), but even so, this things is pretty shiny

View attachment 1704609


The front bumper does have a winch hidden away in there, which allows a nice beer shelf to be built in. This rig being an FJ80, it has slightly narrower flares. The wings sit just inside of the outer edge of the flares, and should look good on either model. It looks pretty darn good without the flares as well (we had to try that out when the flares were off this rig). LED turn signal lights are included.

View attachment 1704610
Center console going to have cup holders in front slot?
 
Center console going to have cup holders in front slot?

Sure is! Part of the assembly process is threaded inserts/rivnuts that are placed in logical locations on the front and back. We will be making accessories that bolt up, as well as publishing the hole layout so folks can make their own attachments. First in line for us is a cupholder for the front and a radio holder for the back. We will also have a shifter console piece that matches this one with gauge and switch spots on interchangeable/customizable faceplates.
 
Got to see a bunch of the Delta Vs products at Overland expo. All I can say is wow! The quality and attention to detail is amazing. I ordered a center console while my family and I were hanging out with David, Jen, and Patrick. They are great people and it shows how much they want to move the 80 series platform forward. My bank account is about to take a hit after seeing all the fun stuff they have coming out. I should have taken way more pics but I was to busy drooling.
33095525_10214705281298165_4607855904031768576_n.jpg
 
Got to see a bunch of the Delta Vs products at Overland expo. All I can say is wow! The quality and attention to detail is amazing. I ordered a center console while my family and I were hanging out with David, Jen, and Patrick. They are great people and it shows how much they want to move the 80 series platform forward. My bank account is about to take a hit after seeing all the fun stuff they have coming out. I should have taken way more pics but I was to busy drooling.
View attachment 1705278

It was great meeting you and hanging out!
 
As far as a receiver hitch one integrated into the swing-away would be my choice simply for a bike rack attachment point. . No real good options out there. Could also be used for a multitude of other attachments such as a grill,table ect. Loving everything else about the truck. Nice work.

Gotcha, that makes more sense. A receiver mount for the swing out will definitely be an option.
 
So whats the word? Is cummins going to release a bigger engine thats more appropriate for an 80?

That's a question for Cummins. We have been accepted into the "Preferred Builder Network", but that doesn't get us access to any kind of unpublished information.
 
So whats the word? Is cummins going to release a bigger engine thats more appropriate for an 80?
They have! Its a 5.9 and theres multiple flavors to choose from.

Honestly, I have a 5.9 swapped 80 and now I want this 2.8 80. I want them all.
 
DAAAAANG! :clap:

Hats off to yall for bringing a TON of new products to market for us, very interested in the R2.8 one day but for now want that rear panhard lift bracket! Congratulations on an awesome looking build and thank you.

Nathan
 
Love it! Good looking stuff! I may be interested in the spring spacer bumps! What will those run?

Thank you very much! Spacer/bump can holders are 250 FJ80 Hydraulic Bumpstop Mounts w/ 1" Spacer

DAAAAANG! :clap:

Hats off to yall for bringing a TON of new products to market for us, very interested in the R2.8 one day but for now want that rear panhard lift bracket! Congratulations on an awesome looking build and thank you.

Nathan

Thank YOU very much! We are hoping we can provide quality products for the enthusiast market for a long time. Panhard lift bracket is available for order now and will ship in about 2 weeks. You can order any time on the site though: FJ80 Delta Panhard Lift Bracket

Have to get home and sort out the last month or so of chaos then do a bunch of short runs of product based on recent orders.
 
Do you know what the rough price point will be for the center console? Great looking products! Thanks for supporting our addictions.
 
Do you know what the rough price point will be for the center console? Great looking products! Thanks for supporting our addictions.

Base price is 650, which includes one accessory of choice. All we have right now is the inner standoff for mounting/tying things inside. Will have radio mounts and cup holders to choose from very soon (can order console now for shipment and hold off on the accessory if you want one of the ones not quite available, they should be ready in less than 3 weeks). Part of the construction is rivnuts, and we will be publishing the layout of those once we have all of our accessories finished. That way everybody can make their own bolt on parts, and folks like @bhicks can 3D print parts that fit perfectly and sell them if he feels so inclined.
 
Thank you very much! Spacer/bump can holders are 250 FJ80 Hydraulic Bumpstop Mounts w/ 1" Spacer



Thank YOU very much! We are hoping we can provide quality products for the enthusiast market for a long time. Panhard lift bracket is available for order now and will ship in about 2 weeks. You can order any time on the site though: FJ80 Delta Panhard Lift Bracket

Have to get home and sort out the last month or so of chaos then do a bunch of short runs of product based on recent orders.

How heavy is that panhard bracket? Would it be reasonable to ask a bud to bring one over in his checked bags or are they available here in Aus?
 

Users who are viewing this thread

Back
Top Bottom