Dash Pad

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Yes, It is a pain in the arse to get glued down properly and the hole always seem to unstick from the original pad. You can clean it up by using plugs as screwhole covers, but if I had it to do over, I would have put the money forward on a new pad.
 
If you are talking a complete repo dash pad, not a cover, then yes I have used one, and I would use it again. I don't rember where I bought mine from, but it worked out perfect.

Scott
 
i slapped some rhino on mine, covered all the cracks and holes looks sweet to, you just dont wanna bounce your head off it
 
For slightly more expense ($280) you can replace the dash pad with a lockable metal box/tray. It will hurt more than rhino. .

The cheapest item is a dash cover at $60-75, but you should search ih8mud to find more details. Dunno how a cover compares to rhino in the hurt dept.

I also dunno how long a replacement dash pad would last in (say) the Arizona sun (and even the $500 'original' pad may deterioate fast in AZ).
 
i have had both, the cover is OK but doesnt cover every inch of the original pad so i would not waste my money again on that. the repo pad that your are looking at on JTO is the same one i got from man-a-fre a few years back they fit great and look good too, they claim they wont crack or anything and are fairly soft. i would not hesitate to buy one, they are an exelent replacement for stock.
 
Dash cover

Hi, I re-covered my dash with Cool Cruisers of Texas' cover, arround $55.00. IT glued down ok, but had to put several braces from the seats to hold the bottom edge, and weighted the top at the same time. HTH, Earl
12140004.webp
 
Last edited:
The covers are alot easier to install if you take out the whole dash pad. That way you can wrap tape around the whole thing after you glue it. I got the dash pad cover from sor and it doesnt cover whole pad either. About 3/4 in. on the sides. I wish I would have spent the extra $$ and bought a new pad. If you are on a limited budget...the covers dont look bad.
 
i put a cover in my old 78...laid bricks on cloth across the top while it cured...no probs...looked great

as for a repro pad from jto...i wouldn't ever buy from them again...not just my own experience, but after reading other's experiences with those a-holes.

i just eliminated the pad all together on my 74 tub. looks fine, a friend covered his with a vinyl cover that velcrod on...it looked good too.
 
nuclearlemon said:
i put a cover in my old 78...laid bricks on cloth across the top while it cured...no probs...looked great

as for a repro pad from jto...i wouldn't ever buy from them again...not just my own experience, but after reading other's experiences with those a-holes.

i just eliminated the pad all together on my 74 tub. looks fine, a friend covered his with a vinyl cover that velcrod on...it looked good too.

I was hoping I'd find another vendor for it. I see that Marks Offroad has a pad for the same price as JTO. Does anyone know if that has a light cutout in it? I've bought from him before and I know he's on here just the whole money order thing is kinda a pain.


Kevin
 
I went to the fabric store and bought some orange tiger stripe fabric for $4 for the yard, and a can of 3M 77 spray adhesive for $6.

I cleaned up the cracked and broken dash pad with some soap and water.
Sprayed it down with the 3M. Adheared the fabric to the dash pad.

Good as new, and a custom dash... :D
 
Back
Top Bottom