Custom Bead Locked Wheels

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

If you want beadlocks, get beadlocks. If you want fake beadlocks, get fake beadlocks. You can't really take advice from somebody that says you shouldn't get beadlocks because they have personally never needed beadlocks.

There's a few guys in our group that don't run beadlocks and it seems like they pop beads on a regular basis. It gets old quick. One guy popped a bead while crossing Fordyce Creek at 11pm with water flowing at 200+ CFS, enough to almost cover a 37" tire. That's not my idea of a good time.
 
I agree with all you said but why buy/use beadlocks if you only air down to 10psi?
Factors like terrain, weight of rig and tire selection including bead/sidewall design have caused me to burp a bead at 14 psi on OEM wheels. I found 10 psi is the perfect balance on 35" Nitto's without giving up too much ground clearance or getting too tippy off camber or scraping the Shiite out of my wheels and still have great traction while carrying 700lbs extra.

Also please let us know how and post a video of trail side fix/patch for 2 inch sidewall gash.
I don't sweat that with triple ply steel sidewalls. Also, I'm not exactly wheeling the CON on extended roadtrips. I'm more of an overlander with a wheeling problem and have not wheeled beyond 7 too from my garage. If I was wheeling focused on 40's - definitely pack a spare tire, as well as other spares for the 3-link, etc. But I'm not and run 35's and I haven't experienced any issues with the tires I chose. So far, so good....
 
Last edited:
So a question for the experienced guys. I'm building (slowly) my Cruiser for off road and most of the trails around here are dry creeks, mid sized rocks and tree stumps, but not really boulders. I was thinking beadlocks would be a good investment as money permits the lift and 37-40" tires. Would you recommend beadlocks for that style terrain?
 
Factors like terrain, weight of rig and tire selection including bead/sidewall design have caused me to burp a bead at 14 psi on OEM wheels. I found 10 psi is the perfect balance on Nitto's without giving up too much ground clearance or getting too tippy off camber or scraping the Shiite out of my wheels and still have great traction.


I don't sweat that with triple ply steel sidewalls. Also, I'm not exactly wheeling the CON on extended roadtrips. I'm an overlander with a wheeling problem and have not done beyond 7 trails too from my garage. If I was wheeling focused on 40's - definitely pack a spare tire, as well as other spares. But I'm not and on 35's and I haven't had any issues with the tires I chose. So far, so good....


Wow you burped at 14psi???? That's a bit surprising, definitely agree that the whole combo needs to be dialed in. Guess nittos have soft sidewall and weak bead.

My take is I would rather change tires to something with a bit stiffer sidewall and stronger bead before go the route of beadlock unless intension is to go below 8psi, just me though. I'm on 35s and OEM wheels also with falken tires and have not burped once even in some pretty rocky and steep situations even down to 10psi, I was far more worried about sidewalls with all the sharp rocks around than bead coming loose.

Curious what PSI @jcardona1 usually run with beadlocks
 
@Qball - I did not loose air on Nittos, but Toyo MT's. Both have quality beads, but rig was packed unusually heavy and it was 40'ish deg C in Baja. Again - lots of variables and why beadlocks are great even for wheeling on what most now consider small tires. I've built my rig to compliment what the 80 was designed for and does better than any other 4x4: drive and wheel over LONG distances with 1k lbs of gear and diesel and not break. She's no exo'ed buggy, but she doesn't need to be to also benefit from a set of Hutchinsons.
 
Last edited:
You are correct on all accounts but OP expressed interest in beadlocks and the idea of it. I'm simply pointing out some of the draw backs, it's not something can't be overcomed but the OP should be warned of the implications. It's a lot of work and better off get the wheels just look like beadlocks if OP doesn't really need beadlocks.


When I go wheeling I found it surprising most won't air down and when they do it's like 25, and yet they like the idea aka "look" of beadlocks. No one needs beadlocks unless go below 8psi most cases or tires. You obviously know the draw backs and dealt with it because you actually use them as they intended to be. When people say they like the idea of bead locker usually means they like the look. Unless the OP keeps popping beads then he doesn't need beadlocker.

Ive been running 10-12 psi off-road and have yet to pop a bead.
You have some valid arguments, but another benefit to beadlocks is they keep the tire from spinning on the wheel as they do at low pressure. If you mark your tires in line with your wheel before a hard day of offroading-especially on rocks, you will find the wheels have spun in the tire which will ruin tire balance.
 
Its a lot simpler to just buy some cheap stealies and glue the tires to them.
Agreed!.....Been there done it. Home Depot....."polyurethane roof flashing compound" available in various tubes. Stopped my 36" swamper from ever coming off the bead again. Poor man's beadlock :)
 
You can't really take advice from somebody that says you shouldn't get beadlocks because they have personally never needed beadlocks.

Perhaps your comment wasn't pointed at me, but I suspect it was. So, to be clear, I would encourage the OP to spend their money in any way they please. I was simply sharing my own personal experience and "lessons learned" as a contribution to the conversation. My suggestion was never that beadlocks were unnecessary. Rather, weigh the pros and cons.
 
Exactly - there are better ways to spend your hard earned $. But if you already have a built rig, they're a good compliment depending on your use.

@mickeyt question was if anyone had considered a group buy. Not a "why BL's thread ?". I think it's an awesome idea to save people some $ and would jump on if I hadn't scored mine used on Kijiji. Hutchinson gave me great customer service and support - you should call them.

Edit: Winters are on now - but here's my garage pic for anyone looking to jump on a group buy
Hutchinson RW 1.webp
 
Last edited:
@Qball - I did not loose air on Nittos, but Toyo MT's. Both have quality beads, but rig was packed unusually heavy and it was 40'ish deg C in Baja. Again - lots of variables and why beadlocks are great even for wheeling on what some now consider smaller tires. I've built my rig to compliment what the 80 was designed for and does better than any other 4x4: drive and wheel over LONG distances with 1k lbs of gear and diesel and not break. She's no exo'ed buggy.



Wow, my buddy's rig is heavy(dual fridge, rtt, gears, water, fuel....)on Toyo MT 37s and he always complains the tires are too stiff even at 12psi.

no doubt beadlocks are better for wheeling and rough terrain if you can handle the drawbacks, you will never have to worry about bead pop or burp. I simply find "mild" wheeler like me who are more into over landing and enjoy occasional harder trails won't "need" bead locks given the trade off.

If OP is ok with all the trade offs then definitely go for it!
 
For breaking beads in the garage or on the trail: use soapy water, a BFH and this:
ysumu2e6.webp

IMHO the extendable indexing prybar works better than spoons and is also useful for tons of other stuff out on the trail. The Matco version works better than GW
 
Last edited:
Back
Top Bottom