crankshaft position sensor?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Update

I think it may be the pan :frown: . Might just have to let it ride a while. What say you?
crankshaft ps2 001 (Small).webp
crankshaft ps2 002 (Small).webp
crankshaft ps2 003 (Small).webp
 
Clean and de-grease the area in the red box then place a bead of silicone along the black line. If the oil dams up on the front side it's the crank seal and if it dams on the back side it's the pan arch.
crankshaft ps2 002 (Small)[1].webp
 
Sorry to bring this back to life but I have this engine and there is no crank sensor where it should be. It's a 94 cruiser with rear drum and no abs, crossover year I guess. can anyone help me figure out where to find mine? the truck has no spark but cranks and rpm stopped working. the front of the pan where the sensor should be but its just blank. Also pulled a misfire code from the truck via blinking cel

image.webp
 
Last edited:
Back
Top Bottom