Cost vs Quality diff for fj40 interior door inserts.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 22, 2011
Threads
484
Messages
1,364
Location
Phoenix, Arizona
I am looking to replace the stock front door interior panels for my 1975 FJ40. Are the aftermarket ones advertised by SOR, Cruiser Solutions and MAF all the same manufacturer? or are there quality or supplier differences.Is there a better source or even OEM ? The price difference is up to about 80 per pair.

Thanks, input always appreciated.
 
I have a set of aftermarket door panels off my 77 for sale. They have the same design as OEM. If interested send me a PM. I can send you a picture.
 
I had the CCOT plastic reproduction panels, and to paraphrase Poser, the quality of the materials is lacking. They are better than a hole in the door, but don't expect it to come close to OEM quality. I then put a set of the serengeti panels on and they are extremely heavy and well made. Only comes in a black color unfortunately, as a charcoal gray would have been a much better color match for the FJ, but you could always get them blasted and repowder coated in a color of your choice. I did not do that on mine as I am not OCD.
 
As we close in on finishing our FJ40 build...this is one of the projects that we plan on taking up. My issue with the current aftermarket door panels that are available is that they offer nothing more than the original door panels.

Our plan is to offer the option of an attachable MPAC grid for mounting MOLLE bags or the option of an attachable cubby for a specially made pouch that can store documents and smaller items.

Somewhat similar to the bags we make for the TJ.

There is plenty of room on the door for it to serve a useful purpose, I don't know why no one has done anything with it yet.

TJ%20fdp100.JPG


TJ%20FDP%20100.JPG


I would like to do a cup holder as well....I just have not sourced one that I like yet.

Any ideas or comments are welcome as this project is still waiting some finished doors.

Doc
 
As we close in on finishing our FJ40 build...this is one of the projects that we plan on taking up. My issue with the current aftermarket door panels that are available is that they offer nothing more than the original door panels.

Our plan is to offer the option of an attachable MPAC grid for mounting MOLLE bags or the option of an attachable cubby for a specially made pouch that can store documents and smaller items.

Somewhat similar to the bags we make for the TJ.

There is plenty of room on the door for it to serve a useful purpose, I don't know why no one has done anything with it yet.

TJ%20fdp100.JPG


TJ%20FDP%20100.JPG


I would like to do a cup holder as well....I just have not sourced one that I like yet.

Any ideas or comments are welcome as this project is still waiting some finished doors.

Doc


Not sure about cup holder, but many new cars have space for a bottle of water and some other stuff.
 
I have the ones from Crusier Corps which appear to be the same ones that are at SOR as I was just over there the other day looking at them. They are ok... my OEM ones were totally destroyed, so repairing was not an option. The big issue was getting them to fit. Matching up the clips etc, was a pain in the butt, and there was some dremel work required around the handle bezel and the windshield crank (handle kept coming off as the clip would stick on the plastic) The main thing on the clips I found was that you need to remove the OEM plastic hole inserts for the clips to work (after breaking half dozen, I had to call to get the solution)
 
does any one know status of the laternative door panel with MPAC and puch options? I didnt see link to sight. thanks
 
If they are plastic, all that I have seen on customer vehicles are not worth what you pay for them in my opinion.


:meh:

What Poser said X 56.

I built my own. 1/8th inch Luan plywood cut to fit the old panels. New clips can be bought cheap from your local auto upholstry supplier if the old ones disapeared on you. While you're there, pick out the vinyl fabric that you want. I don't pay retail since I'm in the business but you shouldn't have to pay over $30.00 for everything.

I had one of my seamstresses sew a patten on the vinyl similar to the OEM and then applied 3M spray adhesive to the luan and to the vinyl and then stuck them together. After that I folded the vinyl over the back side and stapled it in place. :cheers:
 
I have the ones from Crusier Corps which appear to be the same ones that are at SOR as I was just over there the other day looking at them. They are ok... my OEM ones were totally destroyed, so repairing was not an option. The big issue was getting them to fit. Matching up the clips etc, was a pain in the butt, and there was some dremel work required around the handle bezel and the windshield crank (handle kept coming off as the clip would stick on the plastic) The main thing on the clips I found was that you need to remove the OEM plastic hole inserts for the clips to work (after breaking half dozen, I had to call to get the solution)

I'm in Cucamonga. Be glad to help you with the project if you like. No charge.
 
As we close in on finishing our FJ40 build...this is one of the projects that we plan on taking up. My issue with the current aftermarket door panels that are available is that they offer nothing more than the original door panels.

Our plan is to offer the option of an attachable MPAC grid for mounting MOLLE bags or the option of an attachable cubby for a specially made pouch that can store documents and smaller items.

Somewhat similar to the bags we make for the TJ.

There is plenty of room on the door for it to serve a useful purpose, I don't know why no one has done anything with it yet.

TJ%20fdp100.JPG


TJ%20FDP%20100.JPG


I would like to do a cup holder as well....I just have not sourced one that I like yet.

Any ideas or comments are welcome as this project is still waiting some finished doors.

Doc

Add a raised mount for a 6 1/4 speaker and that would be cool.
 
Back
Top Bottom