Clutch slave and master help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 1, 2015
Threads
9
Messages
58
My 72 350/sm420 has these non toyota clutch slave and master parts. Any ideas?

IMG_20201124_131813802.webp


IMG_20201124_131845232.webp


IMG_20201124_131838089.webp
 
Trying to identify what these may have come from in order to replace the slave. Update, its a 68-70 muncie 4 speed if that matters.

thats good first post info....
 
You should replace both the MC and slave cylinder at the same time. Toyota parts will work, but the toyota combo doesn't have quite enough throw for your set up.
I have been using toyota master/slave combo on my SBC for years
 
I've been running a sbc/sm420 for years using stk 40 toyota slave and master. I did fabricate a bracket for the slave, and use the 420 bellhousing, clutch fork and bearing, along with I think , GMs period correct pressure plate.
 
Back
Top Bottom