Club Name - Appalachian vs Keystone Cruisers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

6106043401876313522.jpg ALCA_keystone_d.png

Here are two logos I came up with.

If you guys like these two, great - otherwise I would love some help!

Thanks,
Andy
 
Last edited:
New here but I like the one w/ the keystone behind the badge. It represents pride in the state and it is very distinguishable as to where you are from?
 
Guys,
I do have CAD and can pretty much draw anything you might need. We use it for our drafting for plans and such. I'm just offering if there is anyway that I might be able to help out.
 
Ditto on the Keystone, but I like Greg's idea of incorporating the TLCA colors too.
 
Hey what other series LC are part of the Keystone Cruisers (ALCA)? I have 40, 80, 60...
 
Just a few quickies criticism encouraged .... :)

1
kc_sr1.png


2
Screen Shot 2015-01-19 at 6.18.34 PM.png
 
They look good. Better than what I came up with. I like that you acknowledge the different series. Here are a few that I was able to do.
ImageUploadedByTapatalk1421713849.670413.jpg
ImageUploadedByTapatalk1421713865.252612.jpg

If you are wondering, the coordinate is the geographic center of the state
 
Last edited:
Steve I think the black on blue maybe a little difficult to read. How,would it look with white on that shade of blue? I like the variety of landcruiser series incorporated, but I think the 40 image is a bit too small. If you could make that larger and still incorporate the series it maybe a winner.
 
Please keep in mind that this logo needs to scale all the way down to 3/4" tall in black and white in Toyota Trails, so small detail will get lost / look bad.

Try to make sure it is legible from 15 feet away when printed 3-1/2" tall.

Don't forget mini trucks, 4Runners, Tacomas etc! I thought it best to use the 40 as the logo as the representative and we can do something more on the back of a shirt for example.

For the new here, see the logo thread down a few posts....
 
Please keep in mind that this logo needs to scale all the way down to 3/4" tall in black and white in Toyota Trails, so small detail will get lost / look bad.

Try to make sure it is legible from 15 feet away when printed 3-1/2" tall.

Don't forget mini trucks, 4Runners, Tacomas etc! I thought it best to use the 40 as the logo as the representative and we can do something more on the back of a shirt for example.

For the new here, see the logo thread down a few posts....
My bad. I just read through that thread. Pretty intense! I'll be happy with whatever you guys come up with.
 

Users who are viewing this thread

Back
Top Bottom