chevy Alternator hook up

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 8, 2004
Threads
297
Messages
5,834
Location
Cloverdale B.C. Canada
Website
www.instagram.com
hi there i am just fininshing up putting my 40 back together and not sure of how to hook up the battery and starter and Alternator to the wiring harness also running msd .need to get power to the fuse block my wiring harness has been a bit cut up by previous owner . . running small block and after market guages . took my truck apart 2 years ago just not sure how to hook up all the wires .
i also have 3 toyota chassis and body manuals . 1973 ,1979 ,1981 . the truck is a 1975 . are the wire diagrams the same for all years 40 . ( color codes )
also what does the fusable link look like . . any info would be great .

Jake S.
 
Pics are from a '73 40 w/a GM alt. There are 3 white and ??? striped wires in my alternator loom. There are two skinny ones & a phat one. One of the skinny ones is not connected. One of the phat red wires is connected to my dual batery setup. Hopefully the pics can explain. The last pic is the stock fusible link.
 
Last edited:
LC_Hamma said:
Pics are from a '73 40 w/a GM alt. There are 3 white and ??? striped wires in my alternator loom. There are two skinny ones & a phat one. One of the skinny ones is not connected. One of the phat red wires is connected to my dual batery setup. Hopefully the pics can explain. The last pic is the stock fusible link.

Is that internally regulated or externally.

I had a GM put on from an alternator shop and told them I wanted it all internally regulated. I only have the one charge wire comming off the alternator. I just terminated the wires coming from the external regulator. Works great. They gave me a 105 amp rebuilt for 80 bucks plus install. It works great so far.
 
Back
Top Bottom