Carb Rebuild - lost a spring

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 9, 2004
Threads
65
Messages
598
Location
Flagstaff, AZ
I have a '71 (10/70) FJ40 2 barrell carb that I am rebuilding and lost a spring. It is the "pump outlet spring" in the body of the carb (Haynes repair manual page 57 item #1).

I have called my local Toyota dealership, MAF and $OR but everyone has told me that it has been discontinued.

Anyone have any ideas that will keep me from buying a new carb for a 10 cent item?

Anyone have an extra one laying around?

Thanks!
 
I don't have a Haynes, but if you go to the SOR carb page and post a pic, I've probably got it. Mark at Marksoffroad.com has one for sure.

GL

Ed
 
In the carbs I've worked on, there is not a spring there, just a little brass weight. Very easily lost when you turn the bowl assembly upside down.
So you don't need a spring, you need a weight.
GL
Ed
 
Very easily lost when you turn the bowl assembly upside down.

I did just that: lost 'em in the lawn! mine ('77) had the ball & spring deal, a friend had some spare parts lying around, and we substituted the little weight thing and all worked fine.

Nial
 
AZkick-n40;
I am the "friend" that SurfPig Nial refers to...(I'm not really his friend, but he always brings beer) no doubt I have one or two of those springs leftover from Nials rebuild. You want I should toss one in an envelope and mail it to ya?
 
Hey...
 
Wait a sec...you say you've got a '71 carb? Haynes page 57 is a later model carb I think (with a vacuum secondary and an AAP diaphragm). Look on page 48 and see if that's your carb.
 
Maybe Garie Chavez in Peoria? contact cruiserland.com Just an idea. Good luck, Claudia
 
AZkick-n40;
Here's my confusion, clear it up for me...
1) You say it's a '71 (10/70) FJ40 2 barrell carb.
B) You say you lost the "pump outlet spring" in the body of the carb (Haynes repair manual page 57 item #1).

But; Haynes page 57 is a later model carb. It is not a picture of a '71 carb. A '71 carb does not have a "pump outlet spring". As Degnol correctly pointed out, two days ago, you should have a little brass discharge weight under the "rivit looking thing" (stopper) that sits on top of the BB. See Haynes, Pg 49, Fig 3.5
And again, you reference http://www.sor.com/sor/cat042.tam?x...tx=cat042.tam " and it is about 1 inch below #23 (there is no number by it". Again, you are looking at a later carb. Not the '71.

So, do you need a weight? Are you sure it was a spring? Did you ever really see it?Are we talking about the same part here? Are you SURE that it is a '71 carb? There's a date code on your carb. Or how 'bout posting a pic of the carb and the hole the stuff fell out of?
 
Try this page:

Marks Offroad

Is it 052-32,33?

Bigger Pic:

Mine (1977) had the spring & ball, and Greg gave me the counterweight (1970-74)to replace my lost spring. Works fine. Hope this adds to the confusion.

Nial
 
Back
Top Bottom