Anyone have a spare rear drive shaft for an 80?
Buyin', Sellin', Tradin' (5 Viewers)
- Thread starter Hugh Heifer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Swapped locked axles into my chop top (aka Top Chef) and have these unlocked ones available for sale. 179k miles on these. $800 for the pair. These are freaking heavy - pick up in Nashville.
The axles are complete minus calipers. I have the rear rotors, which are included but not pictured - but they are a bit rusty and might clean up if machined. The front has ABS speed sensors mounted and I have the wiring I pulled off of it as well. These rear axles are monsters - I don't think I appreciated how heavy and beefy these things are! Glad to get more pics or discuss. Thanks.
Go get them Joel. They were on craigslist a while back, but haven't seen them up lately.
- Thread starter
- #1,509
Those would be great under a T100 or a Tundra.
Anybody have an 85+ FJ60 steering gearbox they want to part with?
I am in the middle of a power steering conversion on my 40 and used a 70 series box not realizing the pitman arm faces the rear on them and now my 40 goes left when I turn right and vice versa. So, it’s not the ideal, but I had a good laugh at myself when I rolled it out of the garage for the first time this week.
Let me know what you’ve got. Thanks.
I am in the middle of a power steering conversion on my 40 and used a 70 series box not realizing the pitman arm faces the rear on them and now my 40 goes left when I turn right and vice versa. So, it’s not the ideal, but I had a good laugh at myself when I rolled it out of the garage for the first time this week.
Let me know what you’ve got. Thanks.
I've still got a few suspension components in my pile of spare parts that could be useful to someone.
1st is;
Used - Overall good condition
Fox Mid Travel Coilovers (Fox part number FOX-883-02-025) with AllPro Off-Road Uniball UCA
Up to 3" of lift for 2nd and 3rd Gen Tacoma, or 4th Gen 4Runner
Coilovers are in great shape, need nothing but to be installed and adjusted to your desired height.
Bushings in UCA's are in great shape, ready to run.
Uniball in UCA's are a little worn.
$1,000.00 for both, or would be glad to trade for mountain bike of equal value.
2nd is;
New - Never Installed
Rokmen Rear Lower Control Arms for 3rd Gen 4Runner.
Purchased for 2001 4Runner, but ended up selling 4Runner before they made it underneath.
$300.00
Here are a few pictures of both
1st is;
Used - Overall good condition
Fox Mid Travel Coilovers (Fox part number FOX-883-02-025) with AllPro Off-Road Uniball UCA
Up to 3" of lift for 2nd and 3rd Gen Tacoma, or 4th Gen 4Runner
Coilovers are in great shape, need nothing but to be installed and adjusted to your desired height.
Bushings in UCA's are in great shape, ready to run.
Uniball in UCA's are a little worn.
$1,000.00 for both, or would be glad to trade for mountain bike of equal value.
2nd is;
New - Never Installed
Rokmen Rear Lower Control Arms for 3rd Gen 4Runner.
Purchased for 2001 4Runner, but ended up selling 4Runner before they made it underneath.
$300.00
Here are a few pictures of both
1994 Toyota Land Cruiser FZJ80
$8500.00 obo
Time to move on to another hobby.
GOOD
4” Iron Man suspension kit
1” iron man spacers
Heavy Duty sterling linkage
(5)Tundra Steelies
(5) 315/75/16 Toyo Open Ointry MT’s
Custom front bumper
Custom rear tire carrier
2 drawer storage in rear
Badlands winch 12k winch
Snorkel
Cobra CB
Sliders
Sleep wiring harness(not installed)
IronPig skid plate
Slee Rear diff locker protection
Rear shock protectors(not installed)
Transfer case low range gears
AISIN front Hubs- converted to part time 4WD
Flan Clutch upgraded
Nitro Chromoly Front Shafts and
Title in Hand
NOT SO GOOD
NO A/C
Needs power steering rebuild. PS works but pump is whining a lot more than it normally has.
$8500.00 obo
Time to move on to another hobby.
GOOD
4” Iron Man suspension kit
1” iron man spacers
Heavy Duty sterling linkage
(5)Tundra Steelies
(5) 315/75/16 Toyo Open Ointry MT’s
Custom front bumper
Custom rear tire carrier
2 drawer storage in rear
Badlands winch 12k winch
Snorkel
Cobra CB
Sliders
Sleep wiring harness(not installed)
IronPig skid plate
Slee Rear diff locker protection
Rear shock protectors(not installed)
Transfer case low range gears
AISIN front Hubs- converted to part time 4WD
Flan Clutch upgraded
Nitro Chromoly Front Shafts and
Title in Hand
NOT SO GOOD
NO A/C
Needs power steering rebuild. PS works but pump is whining a lot more than it normally has.
Last edited:
- Thread starter
- #1,513
- Thread starter
- #1,514
Good looking trail rig. No lockers?
No sir. She’s locked.
What's the new hobby?
Beaches and Islands
Fixed it for you.
Anyone happen to have a set of stock FZJ wheels that they need to get rid of?
nofomoco
SILVER Star
I have four stock wheels off a ‘97 plus one steelie. I also have a ‘96 80 with a cracked block if you need another parts rig.