I need a window regulator for a 60, front passenger side.
Buyin', Sellin', Tradin'
- Thread starter Hugh Heifer
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Hi all,
Need a complete 3rd member for my '65 fj45, any 40 front or rear before '79 can work...
Thx,
Joel
Need a complete 3rd member for my '65 fj45, any 40 front or rear before '79 can work...
Thx,
Joel
link to my brother-n-law's 60 for sale with 4BT. here in Chattanooga.
https://forum.ih8mud.com/vehicles-t...9853-83-fj60-cummins-4bt-conversion-sale.html
https://forum.ih8mud.com/vehicles-t...9853-83-fj60-cummins-4bt-conversion-sale.html
Not sure if I have any right posting here since I'm not a member so please delete if I'm over-stepping.
Anyhow, I'm in need of a 2F. I found out too late that the PO marred up the crankshaft and his fix was welding the pulley on. So, if any of you kind people have one or have a lead to one, please PM me.
Anyhow, I'm in need of a 2F. I found out too late that the PO marred up the crankshaft and his fix was welding the pulley on. So, if any of you kind people have one or have a lead to one, please PM me.
Got a couple extra parts laying around the house. 8" LOW pinion 3rd and a forward shift t-case if anyone is interested. Link to classifieds listing:
https://forum.ih8mud.com/sale-parts/642540-ga-top-shift-case-low-pinion-8-3rd-macon-ga.html
https://forum.ih8mud.com/sale-parts/642540-ga-top-shift-case-low-pinion-8-3rd-macon-ga.html
Still looking for a home for my worn out 2F. Would like to get $150 for it if anyone might be interested or do some trading.
Still looking for a home for my worn out 2F. Would like to get $150 for it if anyone might be interested or do some trading.
PM Sent
Hey delmandi, are you still interested in the 2F?
- Thread starter
- #390
Selling my Silverado...
https://forum.ih8mud.com/vehicles-t...rolet-silverado-z71-extended-cab-georgia.html
https://forum.ih8mud.com/vehicles-t...rolet-silverado-z71-extended-cab-georgia.html
- Thread starter
- #391
Free body dolly.
Built to tote a 40 body.
Come get it. Hope to never use it again!
It is in Rome, GA
Posted from a brick.
Built to tote a 40 body.
Come get it. Hope to never use it again!
It is in Rome, GA
Posted from a brick.
- Thread starter
- #393
You can't leave for 2 years you were just elected to a 2 year term
- Thread starter
- #395
I'll telecommute.
I have a grey FJ80 dash with a cracked pad, FREE to a good home. Base is in good shape, pad is cracked right over the cluster. If no one wants it it will probably go out on the curb next week.
PM if you want pics.
EDIT: Garbage Man took it Wednesday
PM if you want pics.
EDIT: Garbage Man took it Wednesday
Last edited:
Built mini axles
Hey guys, I am selling my built toyota mini axles because I am moving up to one tons. Axles are still under the rig, but will be coming out soon. The following list pretty well explains it all.
1984 Front:
Longfield axles-$760
ARP knuckle studs-$88
OEM studs $56
Rock ring $23
Marlin inner axle seal $20
Knuckle wiper kit $56
Knuckle rebuild $160
Creeper gussets $50
5:29 gears with professional install $900
Lock rite $300
Backing plate eliminator $30
Hydro assist cylinder and brackets $276
Cylinder block mount $30
High steer arms $300
Tie rod drag long and rod ends $275
ARP hub studs $120
Gussets $25
IFS front disk conversion $320
Total front $3789
IFS Rear:
Rear disk conversion $425
Spool $225
5:29 professional install
Total rear $650
Overall total $4439
I am asking $2800
These are ready to bolt in and go. Everything has been added to these axles within the last 2.5 years or so with only a handfull of rides on them.
I may consider possible trades for the following, but cash is king:
42" pitbull rockers
17" beadlock rims
14 bolt detroit/grizzly
PSC double ended ram/orbital valve
If you have questions please call or text.
Tripp 423-762-2194
Hey guys, I am selling my built toyota mini axles because I am moving up to one tons. Axles are still under the rig, but will be coming out soon. The following list pretty well explains it all.
1984 Front:
Longfield axles-$760
ARP knuckle studs-$88
OEM studs $56
Rock ring $23
Marlin inner axle seal $20
Knuckle wiper kit $56
Knuckle rebuild $160
Creeper gussets $50
5:29 gears with professional install $900
Lock rite $300
Backing plate eliminator $30
Hydro assist cylinder and brackets $276
Cylinder block mount $30
High steer arms $300
Tie rod drag long and rod ends $275
ARP hub studs $120
Gussets $25
IFS front disk conversion $320
Total front $3789
IFS Rear:
Rear disk conversion $425
Spool $225
5:29 professional install
Total rear $650
Overall total $4439
I am asking $2800
These are ready to bolt in and go. Everything has been added to these axles within the last 2.5 years or so with only a handfull of rides on them.
I may consider possible trades for the following, but cash is king:
42" pitbull rockers
17" beadlock rims
14 bolt detroit/grizzly
PSC double ended ram/orbital valve
If you have questions please call or text.
Tripp 423-762-2194
http://knoxville.craigslist.org/pts/3423582335.htmlnot mine but cool! 65 Nissan Patrol. My cousin has a 65 or 66 that he has restored.
Looking for 8274 and 40 fenders
I've been looking for a decent 8274 for a while now. My 4+ bumper is feeling kinda naked. I'm also looking for front 40 fenders in any kind of shape as I'll be using them for a rear fender fab job. Don't have to be whole or in any kind of good shape as long as there is some good metal on them. Hoping to find 4 to 6 depending on what shape they're in.
I've been looking for a decent 8274 for a while now. My 4+ bumper is feeling kinda naked. I'm also looking for front 40 fenders in any kind of shape as I'll be using them for a rear fender fab job. Don't have to be whole or in any kind of good shape as long as there is some good metal on them. Hoping to find 4 to 6 depending on what shape they're in.
Last edited:
I've been looking for a decent 8274 for a while now. My 4+ bumper is feeling kinda naked. I'm also looking for front 40 fenders in any kind of shape as I'll be using them for a rear fender fab job. Don't have to be whole or in any kind of good shape as long as there is some good metal on them. Hoping to find 4 to 6 depending on what shape they're in.
Coolhandluke usually has some 8274s and he travels a lot for work. If you are interested you can pm me your # and I'll pass it along, he doesn't get on line much.
And he might still have my old 40 fenders.
via mobile app.