Buyin', Sellin', and Tradin'

Joined
Mar 24, 2006
Messages
1,029
Location
Alabama
x4 good used tires for sale.
Kumho Road Venture
30x9.5x15
8k miles
In Tuscaloosa but I go to Montgomery a lot and Ft Rucker some too.
FJ55 not included :pig::pig::pig:

Cost $500.

Trade for 200 green backs or trade up on some 315/75r16s with 50%+ tread

AA0C1ECF-C408-4CF1-AEBA-7D1E34978B68.jpeg


A9F69CBA-7414-4D07-ABED-23A8908CB40B.jpeg


0598AB5C-EC3F-499E-951B-A67527910953.jpeg


3FAF9BA8-5BF8-4239-A78B-6C19EF4D7706.jpeg
 
Joined
Aug 10, 2011
Messages
1,585
Location
Lawrenceville GA
Anyone have a 305 ft/lb torque wrench that I could borrow or know where I can rent one near lawrenceville. I want to try my hand at the oil pump seal in the coming months but don't want to buy one.
 
Joined
Dec 29, 2012
Messages
809
Location
Marietta GA
Up for sale is a rear e-locked axle for a 100 series land cruiser. It is from a 1999 LC with approximately 220k on it and made no noise and worked properly when removed. Brakes and hardware have been removed and is ready for the swap into your LX470! Comes with actuator and wire loom. SLEE Off-road sells the control circuit for around $100.00 to actuate the locker.

I also will be listing many other various items from this truck:

Brake booster / ABS unit $250.00
E-locked axle with actuator $650.00
Denso Alternator $75.00
Main fuse relay box $75.00
Sunroof motor $100.00
Front and rear driveshafts $50.00 each
8 coil packs with 100k on them $75.00
8 fuel injectors 220k on them $75.00
Two front doors $50.00 each
Windshield wiper motor $50.00
Throttle body with servo motor $150.00

All items were removed from a 1999 Land Cruiser with approximately 220k on it.



Thanks for looking.
Mark
5CB1268C-DEF3-4449-AC17-A994605847D9.jpeg
197FBC06-CC11-42A5-9D18-D7C30E121ED0.jpeg
828337AF-AB6F-4A5A-BA51-308D83DFDFA9.jpeg


A39A8B0C-A701-4B61-9708-4F7EE09527CA.jpeg
 
Joined
Jul 15, 2010
Messages
20
Location
ATL
Morning Gents. I have an OEM bumper off of a 1996 80 Series as well as a brush guard, both in good shape, located in ATL. Both listed for sale in the classifieds, but "OBO" rules.
DM if you're interested.
 
Joined
Jan 22, 2018
Messages
749
Location
Georgia
I have 4 stock rims of my 2011 200 series. They include a used set of 285/65-18 BFG Ko2's with 2015 date codes. They are probably around 6-7/32nds tread depth. 1 has a pro installed patch. This includes 15 lugnuts and 4 center caps. When I pick up a spare 17 inch tire this will be revised and raised to 5 rims. $550 located in Acworth can meet within reason. Not listed anywhere else yet.
 
Joined
Sep 19, 2012
Messages
607
Location
Athens, GA
I have 4 stock rims of my 2011 200 series. They include a used set of 285/65-18 BFG Ko2's with 2015 date codes. They are probably around 6-7/32nds tread depth. 1 has a pro installed patch. This includes 15 lugnuts and 4 center caps. When I pick up a spare 17 inch tire this will be revised and raised to 5 rims. $550 located in Acworth can meet within reason. Not listed anywhere else yet.
I’d be interested to see a couple of pics.
 
Joined
Dec 29, 2012
Messages
809
Location
Marietta GA
Up for sale is a rear e-locked axle for a 100 series land cruiser. It is from a 1999 LC with approximately 220k on it and made no noise and worked properly when removed. Brakes and hardware have been removed and is ready for the swap into your LX470! Comes with actuator and wire loom. SLEE Off-road sells the control circuit for around $100.00 to actuate the locker.

I also will be listing many other various items from this truck:

Brake booster / ABS unit $250.00
E-locked axle with actuator $650.00
Denso Alternator $75.00
Main fuse relay box $75.00
Sunroof motor $100.00
Front and rear driveshafts $50.00 each
8 coil packs with 100k on them $75.00
8 fuel injectors 220k on them $75.00
Two front doors $50.00 each
Windshield wiper motor $50.00
Throttle body with servo motor $150.00

All items were removed from a 1999 Land Cruiser with approximately 220k on it.



Thanks for looking.
MarkView attachment 2090116View attachment 2090119View attachment 2090117

View attachment 2090118
ABS unit sold
 
Joined
Oct 4, 2018
Messages
70
Location
Marietta, GA
Anyone have a later fj40 roll bar laying around? Mostly just need the hoop, but will take all of it if price is right.

Thanks - Farrell
 
Joined
Mar 24, 2006
Messages
1,029
Location
Alabama
WTB a cleanish, sub 200k miles, ‘91-92 3FE FJ80. Stock is better. Prefer white.

Have a new engine, unlocked ‘94 80 on 35”s, a triple locked 80 with 300k and 315”s, and a 2011 Tundra if you want to add cash.

B19B09FE-49D5-4AF1-B811-9D09A3F0C085.jpeg
 

CruisinGA

 
 
Joined
Mar 27, 2003
Messages
6,197
Location
Georgia Tech
Free: working when removed (1 month ago) master cylinder and brake booster from ‘74 FJ40.
Working when removed complete rear brake backing plates and drums.

text me 404 four zero six 8778 if you want it!
 
Joined
Oct 22, 2010
Messages
178
Location
Bogart, GA
I’m looking for a set of 4 or 5 275/70r18 preferably, but am open to sizes around that range. I’m located in Bogart, but will be traveling through Augusta over the next week too.
 
Top Bottom