Buyin', Sellin', and Tradin'

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

O.K Offering to Club Members first Thinking $650 Cost $1000 new.
:steer:Warn Premium XD9000i 9,000lbs Recovery Winch 125' I'm going to Moab this year and need a Disc Brake frontend an ARB, and an Orion. I don't use the Winch Cause I'm the Best Driver :steer:in the Club!!!:grinpimp::grinpimp::grinpimp: See Avatar for proof!!!

Warn Part #27550 Features Include:
9,000 lbs of pulling power
12 volt 4.6 horse power motor
156:1 gear ratio
remote control switch with 12' of cord
3 stage planetary gearing
125' of 5/16' diameter wire rope


Henry Cell #(770) 856-9743
I have not posted it anywhere else I would like it to stay in the club!​
Lucys Germany Trip 2010 320.webp
Lucys Germany Trip 2010 322.webp
XD9000i Warn Winch.webp
 
ummmh, no, that's not why you don't need it... You don't need it because the thing never leaves the trailer. :flipoff2::flipoff2::flipoff2:
 
Homemade Tow Bar

Cross post form the STLCA section

I just cut this off a tube bumper I am taking to recycle. Some one can use this I am sure. Be glad to trade it for FJ40 front frame horns, an FJ40 heater valve or will sell it for $20.

It uses a 2" ball and is located in Rome.





 
Stereo

Hey All,
Looking for a dirt cheap stereo for my 85 fj60 to get me through the holidays. Nothing fancy maybe a stock deck or some old tape deck collecting dust on your shelf you want to get rid of for cheap. It would be even better if you could bring it to the meeting on tuesday but if not I could always come and pick it up.
Thanks and I look forward to finally going to my first meeting.
Thanks
Kelly

ksollinger@hotmail.com
 
1978 FJ40 Roof/Jumpseats/Tire Carrier

I have several parts from a 1978 FJ! Want them gone and used by someone instead of sitting here rusting/wasting! Make an offer. I am in Gainesville and am not delivering or travelling sorry.
I can send pics if you email me. Everything is solid but has typical GA age(rust). 1 of the jumpseats is broken but would easily be fixed with a welder. Email any questions or call and come look. Roof is really nice but raingutter is starting to do what they do:( along the edges.

Roof
Jumpseats
tirecarrier

Rick
678-316-2435
dairyqueengainesville@yahoo.com
 
I have 4 GY Silent Armor tires with about 30% tread.
I also have 1 that has less than 1K of pavement time (no trail time).
All 5 are 285/70/17

Would like to get $75 for the "new" one and $125 for the remaining 4 which would make fine daily driver tires for another 10K.
63393_474710324145_795884145_5496642_3204662_n.jpg

Also have 5 Super Swamper 34x10.5 LTB's (for 17") with 25% tread, but side lugs still beefy. These could be wheeled for a few more trips and eventually be used for spares. Will sell all 5 for $125.
150592_474710274145_795884145_5496641_73505_n.jpg

Pics are from the last time tires were on my truck (from last winter/spring). They have been warehoused since. If interested I can take "clean" pics.


PM me if interested in any of these tires. Will sell individually for negotiated price.
 
brake master cylinder...

Hey all,
Nice to meet everyone yesterday. Im Kelly and I drive the 2 tone fj60 with the roof rack. My master cylinder has decided to start leaking on me and I was wondering if anyone had an extra floating around. Looking for either a stock or 4runner or T100 master. Let me know what you got and how much.
Thanks
Kelly
 
"Free" 33x12.5x15 BFG A/T, but no for driving

Folks,
I have a 33x12.5x15 BFG A/T in amazing shape with the exception of a sidewall slice about 1 inch long. Since this is unrepairable, it's not being offered as a driving tire or even as a spare, so don't ask. With that being understood, if anyone plans to build a swing for their kid for X-mas, this is your tire.

I repeat - not a driver! But come and get it if you have another idea for it. Put it to good use.

PM me if interested. Thanks.
S
 
4x4 labs 6stud knuckle setup

I built these knuckles and then went another route. Parts have never been run.
Heres what i have.

Left and Right toyota minitruck/cruiser knuckles, 4x4labs 6stud conversion blocks professionally tig welded on and then machined flat for a perfect mating surface, and the 4x4 labs arms that go with these. They also come with 12 brand new toyota knuckle studs. They are drilled for 3/4 heims. Here is a link to the 4x4 labs site http://www.4x4labs.com/products/stee...version-blocks

I can email pics if needed.

$400 shipped obo complete ready to bolt on

Thanks
 
I have a Mini truck complete front axle HUB to HUB w/disc brakes.
Asking $250 obo

Thanks Heather! Good idea!

Still got the axle? PM me if you do, would like to see pictures of it.
 
3 years ago... :doh:************

aw man...forgot the new stuff would all be towards the end of the thread. :crybaby: well shoot...anybody else know of an amazing deal on a solid axle??? I'm in the market for one as we speak...
 
I have some fj62 headlight bezels and the grill for sale. Not show quality but all tabs are intact. Some flaking and minor blemishes/bubbling. 50 dollars?
 
Forgot to mention pics of grill are in my garage
 
FOR SALE: bucket seats out of '86-88 4runner; tan / brown color; great shape

As the title says, bucket seats for sale from 86-88 4runner.

-coloration is dark brown / tan
-all original cloth / beads in great condition
-suspension is in good condition (soft and comfortable)
-light tan seat covers included (no tears, but stained over the years--viewable in photos)
-adjustment rails allow forward / backward adjustment
-backrest forward / backward adjustment
-head rest up / down adjustment
-pass. side backrest adjustment nob missing (metal bar still there-still functions properly)

$100 for the pair w/ seat covers included.
Located in Lilburn, Georgia. Give me a call at (four oh four) 735-7199, PM me on here, or email at cookie48711@yahoo.com

Thanks guys!

IMG_1326.jpg
IMG_1325.jpg
IMG_1324.jpg
IMG_1323.jpg
 
2 -285/70/17 BFG KM2s aprox. 90% tread left. $300 obo

Rear drawers for FJC.Custom made very nice. Can be used with seat up or add panel for complete flat space with seats down. $150



 
Back
Top Bottom