Buyin', Sellin', and Tradin'

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

WTB: a single 80 series alloy wheel.

FS: new GY Wrangler Silent Armor 285/70R/17 all-terrain. Excellent condition, 700 miles of drivetime on it (was my spare).
 
Garage Sale due to SAS (with more parts coming soon)

Updated 3/22

I have 2 shocks that came off the front of my 89 truck. I ran 2 inch ball-joint spacers (which I still have if interested) and +/-1.5" on the torsion bars so these should accommodate roughly 3-5" of lift in the front. Shocks have about 3K miles on them and +/- 10 trail rides so they're in great shape. Paid almost $100 for the pair brand new.

Asking $45 for the pair before they go on Craigslist.
Ebay items 044.webp

Have 2x 33x12.50x15 Durango MTs that makes a great trail spare, has about 35% tread No punctures or patches. Also will have 2 more 33x12.50x15 tires coming soon but different brand that these, roughly 15% tread and great for spares.

Asking $35 per tire for Durangos, pic shows tread pattern, actual tires have more tread that the one shown.
Ebay items 055.webp
Ebay items 045.webp
Ebay items 044.webp
Ebay items 055.webp
Ebay items 045.webp
 
Last edited:
1-ifs box in great shape $65 obo plus shipping

1-toyota power steering pump from 86 pickup with reservoir $30 obo plus shipping

1-sky manufacturing pitman arm 3/4 drop with fj80 taper $75 obo plus shipping

1-r151f bellhousing with shift fork $175 obo plus shipping.

Make me an offer, this stuff is taking up space in the shop.

Will
 
1-ifs box in great shape $65 obo plus shipping

1-toyota power steering pump from 86 pickup with reservoir $30 obo plus shipping

1-sky manufacturing pitman arm 3/4 drop with fj80 taper $75 obo plus shipping

1-r151f bellhousing with shift fork $175 obo plus shipping.

Make me an offer, this stuff is taking up space in the shop.

Will

I'm very interested in the pitman arm, how about a package deal for the arm and diff in the next week or so?
 
WTB Fan Shroud

[STRIKE]I need a late model 40 fan shroud. Post '76 will work I think. Running a 60 clutch fan on the frame off. It measures 17 1/2 inches across. PM me. I'm in Rome.

Thanks.[/STRIKE]

Got one on the board.
 
Last edited:
F Motor For Trade

I have an F motor not doing anything. Was running strong but leaking oil everywhere when I pulled it but I do not know any numbers.
Oil pan was removed, cleaned and painted and replaced with a new seal. New side gasket seal (push rod cover cleaned and painted) and new fuel pump seal all installed, new rear main and pilot bearing. I replaced it with a 2F.

I am in need of 1 pre-75 headlight bucket, '72 wiper motor, good IPAs, Jim Beam Black and a decent painter with a booth. Any generous combination of these or $200/O will take it.

Engine is in Rome.
 
Last edited:
disc brake swap

I have a complete disk brake swap for a 40 (knuckles, spindles, outer birfs, aisin lockouts, steering arms, rotors, calipers). Its from a mini truck. Parts are in atlanta georgia. I can get them to bristol tn via several different routes.

I can ship but itll be on your dime.

$250obo

Will
 
5-BFG a/t's 315/75r17 with crager soft 8s, in great shape

I have 5 bfg all terrains. 315/75r17. Well over half tread left, wheels are crager soft 8s, they have a few scratches but nothing major, they are in really good shape. They are 6 on 5.5 pattern.

Im asking $1000obo for all 5 tires and wheels. I may seperate, but not sure just yet.

Tires are in atlanta ga but i can get them as far northeast as bristol tn via several different routes

Let me know, make me an offer.

Will
 
I am in need of some pre-79 seats (I plan on recovering them)


I have the original seats plus frames out of my '74, was in the truck until a year ago when I installed Corbeau's.

IIRC everything is in pretty good shape except the "springs" that provided support are either worthless, rusted out, or missing. They don't have headrests or the holes for them.

Let me know if you're interested.
 
I have the original seats plus frames out of my '74, was in the truck until a year ago when I installed Corbeau's.

IIRC everything is in pretty good shape except the "springs" that provided support are either worthless, rusted out, or missing. They don't have headrests or the holes for them.

Let me know if you're interested.
Got it covered. Thanks for the offer.
 
4 powdercoated FZJ80 wheels in great shape

I have 4 FZJ80 wheels that are powdercoated gray. They are the color of the FJ40 hubcap wheels. Color is awesome and they are in great shape. They have centercaps that have been painted black.

Askin $350obo for the 4.

Will

IMG_2038.jpg


IMG_2039.jpg
 
Back
Top Bottom