Trevor--let me know on the CV axle, I have 4 of them. 2 on the IFS skeleton and 2 trail spares. I'll be at John's on Saturday and I can hook you up, thinkin' about $30
Last edited:
Buyin', Sellin', and Tradin'
- Thread starter CandyPants
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Yea, 2 are shot and might make trail spares. The other 2 are in decent condition and still have some miles left.
1966 Toyota FJ40 Landcruiser for sale .
Not enough time to work on the cruiser anymore, so I hate to do it but I must sell it.
Great Project truck .
1966 Toyota FJ40 Landcruiser
Aftermarket disc breaks
Engine runs solid
Good Straight Frame
Also the frame has been sandblasted and coated with por-15.
Make me an offer.
Email me at CantBstill@Charter.net if interested. And I can send you pictures.
Thank you all.
Not enough time to work on the cruiser anymore, so I hate to do it but I must sell it.
Great Project truck .
1966 Toyota FJ40 Landcruiser
Aftermarket disc breaks
Engine runs solid
Good Straight Frame
Also the frame has been sandblasted and coated with por-15.
Make me an offer.
Email me at CantBstill@Charter.net if interested. And I can send you pictures.
Thank you all.
Looking to source a vehicle trailer. May have found buyer for my truck. Anyone in the N/NW ATL area have one I could borrow or even rent for a day +/-? Would be willing to allow ride-along if schedules allow.
WTB-Stock Front Bumper, 80 Cruiser
Looking for a stock 80 bumper for my 97 cruiser. send me a PM if you have one. Thanks! KS
Looking for a stock 80 bumper for my 97 cruiser. send me a PM if you have one. Thanks! KS
nate sent you an email
WTB: 17" FJ Cruiser Wheels
Looking for a set (4) of FJ Cruiser 17" Alloy Wheels. Please let me know if you have a set. Condition does not matter. I plan on painting them.
Looking for a set (4) of FJ Cruiser 17" Alloy Wheels. Please let me know if you have a set. Condition does not matter. I plan on painting them.
can't believe I'm selling her. need dinero for the next project though...
1994 FZJ80 - $15k
odo. 167k
4:88's w/ lockers
snorkel
37" BFG KM2's on ProComp wheels (barely 2 months old)
ARB front / Kaymar double swingout rear bumper
45 gallon aux tank
Borla exhaust
Metaltech sliders (2009)
Slee 6 inch lift (2009)
Slee Part time 2WD conversion (2009)
Transfercase skid
Warn 10k winch w/ remote and incab controls and synthetic line
Dual batteries / Die hard Platinums (2009)
2000 watt power inverter built into rear fender area (big enough to run power tools)
Uniden Pro 510 CB
Alpine head unit with Bluetooth and IPOD interface(2009)
This is a solid FZJ80 and buyer will get an additional full-time transfer case if wanted.
Price is $14k with 35" Toyo MT's (80% tread left) on black Procomp alloys
1994 FZJ80 - $15k
odo. 167k
4:88's w/ lockers
snorkel
37" BFG KM2's on ProComp wheels (barely 2 months old)
ARB front / Kaymar double swingout rear bumper
45 gallon aux tank
Borla exhaust
Metaltech sliders (2009)
Slee 6 inch lift (2009)
Slee Part time 2WD conversion (2009)
Transfercase skid
Warn 10k winch w/ remote and incab controls and synthetic line
Dual batteries / Die hard Platinums (2009)
2000 watt power inverter built into rear fender area (big enough to run power tools)
Uniden Pro 510 CB
Alpine head unit with Bluetooth and IPOD interface(2009)
This is a solid FZJ80 and buyer will get an additional full-time transfer case if wanted.
Price is $14k with 35" Toyo MT's (80% tread left) on black Procomp alloys
interested in selling just the tires?
No, sorry
16" American Racing Bajas powdercoated Harley Davidson Black Pearl
Up for sale is a one of a kind set of American Racing Baja's
$450.00 + shipping
Rim size: 16x8"
Bolt pattern: 6 on 5.5"
Backspacing: 4.5"
Polished Aluminum
I bought these to customize a look that'd be similar to AR's Mojave Teflons, but went a different route upon researching powder coating. I finally went with Harley Davidson's Black Pearl, a crazy, multicolored shiny black with tons of reflective metal flakes for maximum appeal. Shot by Smoking Gun Powder Coating with ACC Toyota. It did take 3 coats for the best finish and orange peel in a few spots resulted, but not noticeable a couple feet out. Pictured is some of the only imperfections.
The wheels themselves were in perfect condition before being taken to the powdercoater, never taken off road no scuffs or scratches.
I am selling these solely to help finance another endeavor with the truck, otherwise these would be going straight on my rig next week. Literally just got out of the powder coater's oven yesterday. The wheels are currently in Atlanta and ready to be picked up or shipped. Taking a loss on these to ensure a quick move. Come with matching center caps.
Powder site to showcase the HD Black Pearl in different lights
Powder Buy The Pound
Up for sale is a one of a kind set of American Racing Baja's
$450.00 + shipping
Rim size: 16x8"
Bolt pattern: 6 on 5.5"
Backspacing: 4.5"
Polished Aluminum
I bought these to customize a look that'd be similar to AR's Mojave Teflons, but went a different route upon researching powder coating. I finally went with Harley Davidson's Black Pearl, a crazy, multicolored shiny black with tons of reflective metal flakes for maximum appeal. Shot by Smoking Gun Powder Coating with ACC Toyota. It did take 3 coats for the best finish and orange peel in a few spots resulted, but not noticeable a couple feet out. Pictured is some of the only imperfections.
The wheels themselves were in perfect condition before being taken to the powdercoater, never taken off road no scuffs or scratches.
I am selling these solely to help finance another endeavor with the truck, otherwise these would be going straight on my rig next week. Literally just got out of the powder coater's oven yesterday. The wheels are currently in Atlanta and ready to be picked up or shipped. Taking a loss on these to ensure a quick move. Come with matching center caps.
Powder site to showcase the HD Black Pearl in different lights
Powder Buy The Pound
Toyota Landcruiser 66' - Atlanta - must move !
Do not have enough time to work on this project anymore.
It is a 1966/67 Toyota Land Cruiser FJ40.
- Has factory Engine, Transmission and Transfer Case
- Frame is good and straight. ( Sandblasted and looks amazing )
-Frame has been redone with black Pour 15
- Body has rust - But in good condition.
- Tire Size 33 x 12" - Needs new ones.
- Rebuilt axles with disc brakes
-Spring lift kit
When we bought the Land Cruiser the previous owner did not have a hard top, hard doors or a windshield frame.
$1500
Please call 404-516-1312
Do not have enough time to work on this project anymore.
It is a 1966/67 Toyota Land Cruiser FJ40.
- Has factory Engine, Transmission and Transfer Case
- Frame is good and straight. ( Sandblasted and looks amazing )
-Frame has been redone with black Pour 15
- Body has rust - But in good condition.
- Tire Size 33 x 12" - Needs new ones.
- Rebuilt axles with disc brakes
-Spring lift kit
When we bought the Land Cruiser the previous owner did not have a hard top, hard doors or a windshield frame.
$1500
Please call 404-516-1312
1983 FJ 60 fs/ft
Just posted my 60 for sale / for trade in the classified section. Wife just bought a 19' Center Console and it would be nice to have a 100 series or possibly an 80 series for her to pull the boat with. Asking $8500.
Lots of work done to this truck. Very simple and bulletproof. PM me or call me with questions. Four04-427-170four.
Sid
Just posted my 60 for sale / for trade in the classified section. Wife just bought a 19' Center Console and it would be nice to have a 100 series or possibly an 80 series for her to pull the boat with. Asking $8500.
Lots of work done to this truck. Very simple and bulletproof. PM me or call me with questions. Four04-427-170four.
Sid
WTB 1979 Fj40 Transfer case
I am in need of a t-case for a 1979 FJ40! Mine cracked and I must replace it and get her moving again. Would consider an entire vehicle if the engine/tranny were good/servicable.
Thanks,
Rick
I am in need of a t-case for a 1979 FJ40! Mine cracked and I must replace it and get her moving again. Would consider an entire vehicle if the engine/tranny were good/servicable.
Thanks,
Rick
Is it a solid case or a split case? I know I have a good split case at the shop.
Per the pics from the link in Rick's signature, he has the non-split T-case. This makes sense because the split t-case introduction date for the 40 series was 8/80.
But he could be looking to do an upgrade in conjunction with a parking brake modification.
LC_Hamma
The Anti-Leafer
FJ40 At Savage Hunter
This is 2nd hand info. There's a rusty FJ40 w/ a disk brake frontend at the Salvage Hunter location in Powder Springs. I'm told it is fairly new on the lot so it hasn't been picked through Georgia Used Parts Atlanta Used Auto Parts Marietta Used Car Parts
This is 2nd hand info. There's a rusty FJ40 w/ a disk brake frontend at the Salvage Hunter location in Powder Springs. I'm told it is fairly new on the lot so it hasn't been picked through Georgia Used Parts Atlanta Used Auto Parts Marietta Used Car Parts