broken birf

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 28, 2006
Threads
41
Messages
551
Location
NorCal
Broke my first birf yesterday playing in the rocks:crybaby: .Guess i was lucky as i was able to make it back to the road(18mi) and then home on the freeway(50mi)
I have the outer part taken apart and it wont quite pull out.the front dosnt have C clips on the axles correct?thanks for any help
 
No C-clips on the front. Depending on how bad you broke it, the bell of the birf may have cracked and expanded causing it to bind on the opening in the knucle. Use some finesse and you should be able to work it out. I've had 'em hang up before.
 
there is a pretty good junk of it missing....have pulled alot of peices out of the knuckle.will give it a try tomorow when a little more awake
 
I'm suprised to hear you were able to drive it on the freeway. Didn't you have trouble steering the rig? What happens to me is the birfs expand & get lodged inside preventing any side to side movement & shredding the inner axle seal. Don't go jammin yer hand in there, those sharp pieces WILL bite you.......
 
Holly hell man, next time just remove it on the trail and drive home. I had an inner cage go on me a tellico once on guardrail and dint notice til I was on trail 1. My steering locked up and I was unable to turn left. Luckly it happened at such a spot I dint drive over the cliff and roll down the moutain 500ft.
 
yes broke one and i could not turn left at all. pita getting it home, luckily i was only a mile away, but took 2hrs to get 1 mile
 
I have the outer part taken apart and it wont quite pull out

You'll prolly have to take the whole knuckle off. It's easier to to deburr all the interior gouges when it's off. Nowz a good time to upgrade to the Long 30 spline super set. I had mine wedged in between boulders this past weekend, tires cranked, & powered out no problem running 38" SX's & an ARB. Man, that's some satisfaction right there!
 
at the time i didnt think i had broken the birf...thought it was the locking hub.I hear alot of storys like you guys are saying that it is almost nondriveable when they break.will try to get some more peices out tonight and see it i can get it out
thanks
 
got it out tonight
birf1.jpg
 
yea there was alot of grease...paint thinner and paper towels work wonders.will try the magnet. the birf came out and the axle stayed in...guess it was broken pretty good
 
those broken burfs make sweet book ends or paper weights.

do you plan on upgrading with some chromolys?
 
i probably should as I am running 37s but for now am just going to fix it with stock.suppose to go on a camping 4x4 outing on the 20th so it will be close if i can get the parts in time.
 
Back
Top Bottom