Brake help needed asap!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 25, 2003
Threads
290
Messages
5,210
Location
Seattle, WA
Ok heres the deal,I just converted my cruiser to disc brakes a couple weeks ago using FJ60 disc parts and a chevy s-10 master. They have been working great until today. I put new soft lines on the front and bled them. On my way down the highway, the brakes started to really stink. I quickly pulled over and the rotors where super hot. The calipers wont let up. I can turn the wheels but I can hear the pads rubbing. Oh, and there is no residual valve in the MC for the front brakes.Can someone tell me why my front brakes are dragging? Thanks/
 
Last edited:
rotors as in plural = misadjusted booster rod or brake pedal clearance. The pressure builds up and cannot escape because the rod is too long.

If it is just one then caliper is sticking/bad hoses swollen shut.

Or....you driving your Cruiser like a hot rod :D


There are lots of posts.....here's one https://forum.ih8mud.com/showthread.php?t=44958
 
Last edited:
no booster, just a MC. Both calipers are rubbing. I adjusted the pushrod so that it wasn't pushing on the MC piston when it is at rest. I don't think its possible to drive my cruiser like a hotrod. :D
Edit:
I have been driving with this setup for a couple weeks now with no problems. I just replaced the front hoses and bled the brakes and how the dragging. Is it the new NAPA lines you think?
 
GetsUThere said:
I can't even imagine how lines could cause that unless they were actually kinked or something.
There are no kinks or extreme bends in the rubber lines or the metal ones. I am so confused right now. I was hoping I would be able to take my cruiser up to crater lake this weekend. Now it looks like I might have to take the girlfriends jetta. :frown:
 
Chase, you are still running drummies in the rear? Well, there IS a residual valve in the rear circuit. Maybe you have the circuits reversed? I used the port on the MC closest to the firewall for my FRONT and the udder one for the rear.
I may be reversed, but I have discs on all fours and my MC has no residual valves. The residual valve is in the MC in the rear circuit, if you removed it, you would have less-than-satisfactory rear braking due to the springs on the shoes pushing fluid out of the wheel cylinders and back into the master. I'm not sure which port on the S-10 master is front or rear. If everything else is new, I would reverse the circuits. You might look at a functioning S-10 and check.
Very unusual to have both calipers dragging.
On the other hand the Jetta will get better mpg, heh.

Ed
 
The residual valve on this MC is in the rear port. If they were reversed, then how come after two weeks of driving it would all of a sudden start? Here is a pic of the MC. I thought the black thing in the rear of the MC was the residual valve(i circled it). That port is going to the rear.
 
Last edited:
Well, its getting late and I should hit the road( in the jetta). Thanks for all the help so far guys, I really appreciate it. I will be back on monday to bug you guys again with more questions. :D
 
Well, I got back from crater lake today(what a perfect lake) and hit some hot springs on the way back. Anyways, I took the cruiser for spin and the brakes are working just fine now. I was thinking about what I could have went wrong and the only thing I can think of is that I added to much fluid to the MC when bleeding the brakes. As a result, when the fluid expanded, it had nowhere to go and thus applied the brakes on the highway. Does this seem possible? The pedal feels fine, nothing seems like its getting hot. My dad told me that disc brake setups always have a little bit of rubbing(pads on rotors), is this true?
 
Yes, the pads should always be "touching" the rotors. But slightly. Glad you had a nice weekend!

Ed
 
Back
Top Bottom