- Thread starter
- #21
After all the crap. I dec. to go with the 10.50 FF Sterling axle. Here are the pics getting ready to drop her in, then we start the front SAS next week.
Builds Bored and building a 02 Sequoia (mild Build)
- Thread starter pilot
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Nice work, Pilot! You said three link in back, or did you decide to use those leaf springs in the pics? What are you going to do in the front coilovers or leafs? Cant wait to see this thing done! What are you doing with the old toytec lift, wanna sell it? I know they are cheap, but so am I.
- Thread starter
- #23
THanks for the compliments. This is all going to be trial and tribs to get it to be flexy, but I will make it work.
Yea. After talking with a few guys over at Pirate that have Sas'ed some tundras, they said that the best set up was the leaf springs in the rear (ie de-leafed ford 3/4ton springs "60 inchers") and to link the hell out of the front. SO here goes
I am selling the ToyTec lift front and rear witht eh HD front coils for $225.00 The pucks are already in the coils and are in brand new condition. Just bolt them in and you are good to go. No spring comressors
Let me know.
Yea. After talking with a few guys over at Pirate that have Sas'ed some tundras, they said that the best set up was the leaf springs in the rear (ie de-leafed ford 3/4ton springs "60 inchers") and to link the hell out of the front. SO here goes
I am selling the ToyTec lift front and rear witht eh HD front coils for $225.00 The pucks are already in the coils and are in brand new condition. Just bolt them in and you are good to go. No spring comressors
Let me know.
So far so good......
A
A
- Thread starter
- #26
Mild Exo, IS in its future.....
Pilot, you traitor, you're ignoring the early Runner forum! 
I decide to visit this side of the forum again, just to see what Pilot's been up to, and now I have to read all the crap above. 
Looking forward to how this turns out, nice to see someone stepping up to the challenge and finding out what works from the LC lineup and what will transfer over to either side.
*Keeping the 88 I assume?
Shane
I decide to visit this side of the forum again, just to see what Pilot's been up to, and now I have to read all the crap above. Looking forward to how this turns out, nice to see someone stepping up to the challenge and finding out what works from the LC lineup and what will transfer over to either side.
*Keeping the 88 I assume?
Shane
Last edited:
- Thread starter
- #28
Whats up Shane, Good to hear from you man, Hope all is well. I do need to visit the mini forum and how all you crazy Mini drivers are doing
Rear is done. On to the front.
Rear is done. On to the front.
- Thread starter
- #29
more Pics those are 315/75/16 Will stiff 37 Krawlers with some trimmming 
schweet!...
Whats up Shane, Good to hear from you man, Hope all is well. I do need to visit the mini forum and how all you crazy Mini drivers are doing
All's well, baby's here, just studying for my last class for the degree and gettin ready for the holiday week. *Have fun with this project man, I'm actually jealous someone actually liked the idea enough to actually do it.
I want action shots when the time's right!
- Thread starter
- #32
After much deliberation. I realized the rear was WAY TO FAWKING high, so I lowered it a bit and it really turned out SICK!!!!!!!! Plumbed the rear brakes and installed the shocks Re-used the Toyotas ABS system (really cool) and hooked up the E-brake, It is amazing how many components work with ford and vise-versa. Just put a set of 315/75/16 MTR Kevlars on her and she rides like a dream. NOW OFF TO LINK THE FRONT WITH THE HP DANA 60
ENjoy the pics. THis is just with the rear Sterling 10.5 FUll FLoat axle installed.
ENjoy the pics. THis is just with the rear Sterling 10.5 FUll FLoat axle installed.
- Thread starter
- #33
one more Geigh photo
Jacket
Moderator
Very cool build. Nice to see a Sequoia getting some love. Did I miss it, or what are your plans for the front?
- Thread starter
- #35
Front will be a high pinion Dana 60 from the front of the same 04 F-350 Ford truck. Been slammed lately, so I have not had the time to get started (insert head hitting wall icon here) Front will be linked and Hydro'ed. Just need to find the time to get it done Prolly start within the next month.
nice
I like the 10.25, as its not "the typical" for axle swaps. Plenty of options for gearing and lockers, and we stock em all.
I like the 10.25, as its not "the typical" for axle swaps. Plenty of options for gearing and lockers, and we stock em all.
Any updates? You sir are my hero I would love to do this to my sequoia but I can't weld
yes. Pilot is still GAY. the suckoya is GAY and his gay ass is moving to virginia. Oh by the way in case you didnt know . pilot you r GAY and you no longer call a brother.
much love NFCH
much love NFCH
OK Pilot, you have many people patiently awaiting updates. You just gonna leave a brother hanging. JK! Is there anyway you can post some pictures of what the back of the Sequoia looks like without the bumper, just curious for bumper building reference? When is your Moab trip planned for? I would love to see your build in person. Hope the move went well.
wicked build! love it.
