whats size are the motor mount bolts on a 22re? i have an 88 4x4 pickup. parts store nor dealer can get me an answer and the size are not in the fsm.
bolt size
- Thread starter hayesvegas
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #2
i also need the size of the bolt that bolts the front drive shaft/flange to the front diff. they may be the same size, i'm not sure.
I think the motor mount bolts are M10x1.25 thread, they are kind short, about 20mm long I believe. They need to be full-thread. You can't use a hardware store bolt because they need to have a 14mm head (JIS spec). Hardware store bolts will have a 17mm head and won't fit.
The driveshaft bolts are a special application, hardened bolt. If your dealer can't locate them, then they suck at using the EPC, call CDan. Marlin also sells them, among others. The should also be easy to find in a junkyard. If you really can't find them, PM me your address, I have a pile of spares.
The driveshaft bolts are a special application, hardened bolt. If your dealer can't locate them, then they suck at using the EPC, call CDan. Marlin also sells them, among others. The should also be easy to find in a junkyard. If you really can't find them, PM me your address, I have a pile of spares.