Best hinge lubrication method?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 3, 2006
Threads
53
Messages
1,727
Location
Laurentians North of Montreal, QC
Hey Folks,

Seems the hinges on my 80 series need lubrication quite often (like every few weeks or so). Mind You, I do wash it almost every second day ;)

Is there a preferred method for efficient and long lasting lubrication? I've tried spray, oil and grease and it's not very effective. Spray is the most effective, but it doesn't last. I wish there were Zerks or something like that...

What do you guys do, especially for the lower tailgate hinge? Any tips and tricks from those of you who ford rivers frequently?
 
Hey Folks,

Seems the hinges on my 80 series need lubrication quite often (like every few weeks or so). Mind You, I do wash it almost every second day ;)

Is there a preferred method for efficient and long lasting lubrication? I've tried spray, oil and grease and it's not very effective. Spray is the most effective, but it doesn't last. I wish there were Zerks or something like that...

What do you guys do, especially for the lower tailgate hinge? Any tips and tricks from those of you who ford rivers frequently?

Have you specifically tried white lithium grease?
 
Have you specifically tried white lithium grease?

Yup try white lithium grease, ignore the antenna mast.
Antenna 001.webp
 
thanks for the suggestions, keep em coming...

I've used a penetrating rust disolver (great but doesn't last) that worked well on my bycicle chain as it stays put, but I guess with the pressure washer it all goes away...

Specificaly, folks, how do you grease the bottom tailgate hinge? There is no spot for lubrication on these...
 
I have put spray white grease on the lower tailgate hinges, and cannot seem to get it to get in where it needs to be. Obviously, WD40 won't last long enough to matter. Maybe I'll use 10wt motor oil?

I have never seen a hinge like the lower tailgate hinges that doesn't respond to spray-lithium grease. Weird.
 
The tailgate hinge on my grey truck was very sticky and no amount or type of grease seemed to help.

Then one day I accidentally tried to close a 2' long 1" wooden dowel in it. The dowel had droped down between the gate and the truck.

Panicked and cursing myself I pulled out the dowel and tried to shut the gate. the shocking part is that the gate now closes perfectly without resistance. It was just the tweak that it needed.

YMMV
 
OK Folks, here's an update for those interested. Should have added it a long time ago, when I actually got it to work right :)

This applies at least to those who do not have problems with the hinges...

A hot day a couple weeks ago I was cleaning up some oil bottles I had lying around and collected the bottoms into one. Most of the oil, I figured, was from some olld 50W I had from several years ago. I put all the ends into a mustard squirt bottle.

Now mind you it was a very hot day, so I presume this method will work best when you oil the hinges during the hottest days of the summer, because I presume it will help with penetration.

I simply oiled all these hinges and whatnot with the squirt bottle (metal was at about 45 celsius that day!). It's been operating smoothly ever since.

50W oil on a hot day= excellent oil penetration for door hinges, thick enough to stay in place.

Bottom line, grease is too thick, regular machine oil is too thin, penetrating oil is way too thin. 50W seems to be ideal for the clearance betwen parts in the hinges. Applied on a hot day, it will flow easily into the gaps, but it would seem to be heavy enough to stay in place.
 
i use a product called T9, you can get it in bicycle shops, it is for lubricating bike chains. its clean and lasts. so if you cant get hot enough to use 50w... give it a shot!
 
they also sell it in smaller non spray bottles that I use. When i use it on my bicycle chain, i get about 5-600 miles out of a proper application. i used it on my 40 to do the hinges 2 years ago and haven't had to use it again since.
 
Boeshield T-9 is the shiznit. Those guys at Boeing know their lubes! It works best if you can allow it time to dry before getting it dirty.
 
Back
Top Bottom