Battery Trays...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 28, 2004
Threads
433
Messages
5,845
Location
Divide, Colorado
So, the time has come to replace my battery tray. I think I want stainless. Is www.stainlesstrays.com the place to go, hands down?

I just wanted to know if there are any other recommendations before I buy.
 
AWSOME product!
 
What Pimp said.

Remove old tray, install new extremely well made tray that fits just like stock, be happy.
 
Yeah, I have been doing some looking tonight at the stainlesstrays Web site. I think my decision is made.

Thanks for the responses, guys.........and the other source, dfmorse.

Here's a dumb question: it gives me the option of a "left" or "right" tray for the 60. What's that all about? Which one is standard U.S. spec?
 
cbmontgo said:
Yeah, I have been doing some looking tonight at the stainlesstrays Web site. I think my decision is made.

Thanks for the responses, guys.........and the other source, dfmorse.

Here's a dumb question: it gives me the option of a "left" or "right" tray for the 60. What's that all about? Which one is standard U.S. spec?

Diesels have two batteries, hence two trays; one on either side of the rad.

Buy whatever side your battery is on.
 
Noel at Stainless trays is a great guy, and makes an awesome product. He designed and fabricated special hold downs for my Optima YT group 31 batteries, charged me nothing extra. These are now regularly available from him. I cannot say enough good things about the product - I have TWO trays by him.

Mike S
 
Mike S said:
Noel at Stainless trays is a great guy, and makes an awesome product. He designed and fabricated special hold downs for my Optima YT group 31 batteries, charged me nothing extra. These are now regularly available from him. I cannot say enough good things about the product - I have TWO trays by him.

Mike S

I second the comment about Noel. Great guy to deal with. I ordered two G31 hold downs for when I do the dual battery setup (along with the right side tray I already have installed). I need to figure out a way to fab up a mount for the coolant bottle (or to hang a tubular reservoir with my space limitations) for my driver's side, so I'll be ordering my left side tray hopefully fairly soon. If only everyone did business the way he does...
 
Spook50

Here's what I did to mount the overflow bottle on the PS battery holder. It uses the same mounting HW, and does not require a change in the overflow hose. It is very secure.

Just made an aluminum piece about 1-1/8" wide, drille it to accept the mounting hardware for the bottle, bent it at right angles and through drilled it to fit the hold down rods on the SS tray. Botls right up. This is less than one banana, takes about 30 minutes. Has worked great for about a year so far, with zero problems.

360092.JPG
 
Mike S said:
Spook50

Here's what I did to mount the overflow bottle on the PS battery holder. It uses the same mounting HW, and does not require a change in the overflow hose. It is very secure.

Just made an aluminum piece about 1-1/8" wide, drille it to accept the mounting hardware for the bottle, bent it at right angles and through drilled it to fit the hold down rods on the SS tray. Botls right up. This is less than one banana, takes about 30 minutes. Has worked great for about a year so far, with zero problems.

360092.JPG

Hey that's a good idea. I don't know if I can still fit the stock bottle behind the battery, but that gives me a good idea for how to mount my isolator and (if I can't fit the stock bottle) a Be Cool cylindrical bottle.
 
Anyone know of a source for a quality single tray for an FJ-40? Noel at stainlesssteeltrays is out of stock.

I am actually looking for something the will fit the Orbital 78DT. I am sure it will go in the stock tray.

Thanks.

Rocky
 
Out of stock as in "forever", or just temporarily out of stock? I got twin trays for by BTJ62 a couple of years ago, one of the best-made aftermarket products for Cruisers out there!
SStray6.webp
ss tRAY mUD 2.webp
 
I really wanted to get one from Stainless Steel Trays, they look great, and the price is right. Unfortunately, here's the email I got from Noel -

Hi Rocky -
Sorry, I won't have them any time soon.
I lost my laser.
Thanks for the interest,
Noel
 
Holy :ban: ! Lost his laser? I'll throw in $20 bones towards helping Noel get another one. It aint much $ but I don't have much $. Installed my tray a week ago, awesome product!
 
Exiled said:
...one of the best-made aftermarket products for Cruisers out there!

I agree. And his prices are reasonable. I've gotta get on ordering my second tray so I can start planning the placement of all my dual batt stuff.

NorCal, them things run up to I think 50-60 grand for a good one. Dunno what Noel was using, but the one we have at our squadron for labeling our tools was about 55 grand. Which begs the question, HOW THE HELL DO YOU LOSE ONE OF THOSE THINGS?!?!
 
That's bad news. Those trays are an outstanding product at a very fair price.
 
Does anyone know what happened to the laser? Did it break?
 
Back
Top Bottom