Another 80 wreck appreciation thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

I checked yesterday and the FZJ80 radiators from my dealership are $500 without discounts.

I just wonder what's out there and price vs. Value and features.

I've heard "go all aluminum", "go OEM (aluminum core with plastic tanks)", "get the fj80 radiator (brass core and I don't know what the top tank is made of)" and then people get brand loyal. I don't know what features make a quality radiator, other than it cools, it fits, and it doesn't leak.
 
Last edited:
The "other material" you cited on the brass cores is plastic just like the aluminum ones.

Aluminum is fine if you really want OEM.

If you want almost-OEM and brass core the Koyo is great. Tiny differences from OEM (like 13mm head bolts on the brackets vs 12) but otherwise just as good. Just make sure you are actually getting Koyo.
 
Sorry to hear about the accident.

Thanks for giving me another reason not to buy an ARB... it multiplied a lot of damage there..
 
Sorry to hear about the accident.

Thanks for giving me another reason not to buy an ARB... it multiplied a lot of damage there..

That corner would have been toast regardless because the inner fender crumples in to absorb the impact. The damage on my FZJ was slightly less and probably at a slower speed, but still took out the headlight, corner light, valance, hood and core support, bumper skin and brackets, and one of the crush cones at the front of the frame horn.
Here is a pic of the original crush cone and the replacement one.
IMG_20170401_113427285.webp
 
Thats a simple fix. About 3 years ago my daughter wrecked her 80 pretty bad, even bent the frame. I was about to sell it for parts, but the truck only had 70,000 original miles (1992). So I decided to bring it back to life. I spent more than the truck was worth it in the market but at the end, now is my daily driver since she upgrades to a 100 series.
Choque before.webp
After tires.webp
 
She's driveable. Still haven't gotten time to find the drizzle leak. Moving sucks. And painting sucks. But I'm able to drive with the only noticeable things being the steering wheel is at an odd angle, and bent! And on left turns up and incline I'm getting a little rub on the front left fender. But just now I noticed no AC. Seems the compressor isn't clicking on. Hoping that's an easy fix as it's texas and about to be a billion degrees every day.
 
She's driveable. Still haven't gotten time to find the drizzle leak. Moving sucks. And painting sucks. But I'm able to drive with the only noticeable things being the steering wheel is at an odd angle, and bent! And on left turns up and incline I'm getting a little rub on the front left fender. But just now I noticed no AC. Seems the compressor isn't clicking on. Hoping that's an easy fix as it's texas and about to be a billion degrees every day.

Most likely the fluid that leaked was A/C oil with dye in it, from a broken dryer?
 
Most likely the fluid that leaked was A/C oil with dye in it, from a broken dryer?

Yeah. I'm thinking this could be my 'leak.' Will this fluid have an oily consistency and be a bright green? I know nothing about AC units outside a compressor kicking in and off, but wondering if my dryer is the source of no AC and the green seepage underneath the bumper. Radiator level still hasn't dropped at all.
 
Yeah. I'm thinking this could be my 'leak.' Will this fluid have an oily consistency and be a bright green? I know nothing about AC units outside a compressor kicking in and off, but wondering if my dryer is the source of no AC and the green seepage underneath the bumper. Radiator level still hasn't dropped at all.

On mine, the stock bumper clipped the line coming off the air dryer when it contacted the core support. Check the lines to see if they contacted anything
 
Yeah. I'm thinking this could be my 'leak.' Will this fluid have an oily consistency and be a bright green? I know nothing about AC units outside a compressor kicking in and off, but wondering if my dryer is the source of no AC and the green seepage underneath the bumper. Radiator level still hasn't dropped at all.
I originally thought it was the AC but didn't think about the bright green dye! I'll bet that's what it is!!!
 
... Will this fluid have an oily consistency and be a bright green? ...

Yep, the dryer is in that corner, low, behind the bumper. Pretty easy fix, replace the dryer and if needed line, add an oz or so of A/C oil, vac and recharge.
 
Sorry to hear about the accident.

Thanks for giving me another reason not to buy an ARB... it multiplied a lot of damage there..

I feel like the ARB did me a favor in this one. Besides some body work, looking more and more like my only casualty was potentially the AC dryer, but hoping its just a line. I probably his the guy going 50+, and he was already stopped from the multiple collisions ahead of me. Traffic was moving a good 80mph when the lead car swerved in our causing the first contact. I hit hard enough that as soon as I realized I wasn't dead, and no one in front of me was hurt, I got instasad that my cruiser was toast, especially with the force needed to open the door due to movement in the fender. I haven't ever looked much into front bumpers as mine came with the ARB, but I'm thankful it was up there and absorbed most the impact.

On another note, the green dye from the AC and my instantly thinking it was coolant from the radiator can be added to the red vs green coolant debate. ;):worms:
 
Last edited:
So, got some time to start pulling off broken parts and checking everything out. I've got a bent drag link. I'm assuming I should just try to source a used or new one, but can it be straightened back out and used? I would assume its safest and best to just pull it off and replace it, as well as get all new tre's and inspect all connecting points, but if its possible/safe to straighten out and reuse I also like saving some $$$. Also realized my front wheels are visibly out of alignment, so she's gonna sit for a while.

As for the AC, I'm assuming its one of the hard lines connecting to the dryer, though I've found no obvious source leakage yet. Sourcing new fender and hood now as well as the pieces surrounding the headlight.

It works out the wife has to go out of town for work for 3 weeks at the end of next week, so perfect timing to try to get the cruiser at least driveable if not all prettied up... if thats possible :).
 
Well... hell.


Bought a press today to prepare to replace all bushings this weekend along with tre's and my drag link since I discovered it was bent. I finally get time after the craziness of moving to get underneath the truck and inspect things and start soaking the bushings in preparation of replacing this weekend... and discover this.

IMG_1167.webp



Control arm and sway bar bent to hell. Axle housing looks to be okay. Here goes yet more money and time as part sourcing. Still looking for a driver fender and hood if anyone out there has any their looking to move :)
 
Have you confirmed if it was indeed the AC drier? A leaking steering stabilizer will have the same looking fluid in it..Or at least mine did. I initially thought all the same things you did then realized the alignment shop didn't tighten the drag link's pinch clamp which would catch on the stabilizer causing steering to bind up at nearly full lock. Further inspection showed a nice dent and that bright green coolant looking fluid coming out of it.

Replaced stabilizer and haven't seen the fluid since.
 
I checked yesterday and the FZJ80 radiators from my dealership are $500 without discounts.

I just wonder what's out there and price vs. Value and features.

I've heard "go all aluminum", "go OEM (aluminum core with plastic tanks)", "get the fj80 radiator (brass core and I don't know what the top tank is made of)" and then people get brand loyal. I don't know what features make a quality radiator, other than it cools, it fits, and it doesn't leak.
If you're going to pay that much, pay a little more and go with a Ron Davis Racing radiator. Nothing better.
 
Have you confirmed if it was indeed the AC drier? A leaking steering stabilizer will have the same looking fluid in it..Or at least mine did. I initially thought all the same things you did then realized the alignment shop didn't tighten the drag link's pinch clamp which would catch on the stabilizer causing steering to bind up at nearly full lock. Further inspection showed a nice dent and that bright green coolant looking fluid coming out of it.

Replaced stabilizer and haven't seen the fluid since.

Yeah, mine was definitely ac related. My steering stabilizer seems to be aokay. The top of my ac dryer shows all the signs of being the source of my green fluid leak, and since the ac went out immediately after, its gotta be the source. A couple of buddies are coming over this weekend to help me get the ARB off and dig into it all, so I'm hoping I just need to replace the dryer and orings to button up the ac. Then just oil and fill and be gtg *fingers crossed.*
 
Back
Top Bottom