Another 80 wreck appreciation thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 31, 2009
Threads
20
Messages
359
Location
North Texas
Fun times in Dallas construction today. Guy cut into an already slowing onramp lane causing a whole lotta braking. I knew I'd hit the guy in front of me and turned into the concrete wall to minimize the impact, but still nailed him pretty hard. His car is a goner. Luckily all involved were not injured, and I'm thankful I was in the 80 and not the wifes VW as her car would have been destroyed as well.


Quick question. I have a slight coolant leak from somewhere up in the front driver side. Bottom area of the ARB is slightly coated from spraying around while driving home I presume. Not a fast leak, but a slow drip. I can't trace it to the radiator or oil or trans cooler, so I'm assuming theres probably a line in there somewhere that was nicked or yanked? I haven't had time yet to pull out the fsm to look at cooling lines, and we close on our house and move in tomorrow, so I don't currently have a garage to pull out the battery tray, or even access to my tools as theyre all in storage. Figured I'd ask you guys for some hints before I have time to really get in there hopefully on Sunday.

Just glad I was in my 80 and able to drive her on home.

image2.webp


image3.webp
 
I'm sorry for your loss!

Looks like the bottom tank to me, but it looks like I can see the belts hanging off the bottom? My first thought was just the AC drier, but that's definitely green coolant.

Otherwise, the 94's have the metal top/bottom tanks and all the hoses are on the RIGHT side of the engine.......
 
Yeah, whats hanging down there are the power lines to the winch. They're long, and instead of cutting down the slack I just had the extra stuff up in the bumper. I thought maybe a hose connected to the trans cooler ran back in there and was possibly nicked. When warmed up and under pressure there's no spray, no hissing sound, just the occasional drip. I'm gonna go back out and look at it in a bit and see what it looks like down there after its cooled and has been sitting a while. I'd already planned to do new suspension bushings and tie rod ends this month, so that will give me the chance to dig into any suspension/steering/drive train damage.
 
There's a guy up in Dallas that parts 80's that I just bought a front axle from. Pretty honest guy to work with if you're interested.
 
There's a guy up in Dallas that parts 80's that I just bought a front axle from. Pretty honest guy to work with if you're interested.

Always willing to find parts locally, so I'd love some info.
 
There are no coolant lines in that corner, only the radiator, which I could see getting damaged by that accident. The trans cooler lines through the core support up there are both ATF only.

And technically 93-94 came with plastic tanks on a brass core from the factory.

You can unbolt and replace inner/outer fenders and core support.. looks to me like all of that damage can be fixed by simply removing and replacing parts. Weekend tops. Hardest part will be disconnecting all of the harness clips, ABS, AC, and other stuff from the inner fenders before removing them.

Bummer.. but at least it's fixable and everyone is ok.
 
They let you keep the Light?

I didn't even notice that until I read yours!

It's like the ARB surgically plucked the eyeball out of the back of the car!
 
Glad you are ok. Did your pancreas break in this wreck?

Haha! Nah, that peaced out on me in 1991. Seems my steering wheel is warped too.
 
I didn't even notice that until I read yours!

It's like the ARB surgically plucked the eyeball out of the back of the car!

Yeah, I got home and realized how much crud from the other car was stuck in my bumper. Made the damage look not quite as bed. Good thing is I have had new headlights sitting in a box waiting to go in for 2 years, so at least I've got that ready.
 
Did the fan contact the core and nick a pinhole in one of the cores?

Could be that. It seems to be coming from the very front, somewhere under the battery box, which made me think a line from the trans/oil cooler. The fluid seems to collect in and on the ARB, and I didn't see or feel any on the radiator itself. Finally in our new house now so hopefully have some time to dig in over the next few days. It's been sitting out there almost 2hrs with only one little drop under it in the driveway.
 
The good thing about this truck is that the whole front end is bolt on. So you can just get the inner fender, and a radiator core support, and start bolting things back together. Knock the front frame horn back into place if it moved too much and get her back on the road.
Here is mine, its how I got it in december from my brother.


Here is the replacement inner fender after I rattle canned it semi gloss black.

Then testing the hood and stuff.

And how she sits now 5 months later

I did everything to get it driveable in about 4 days. Then started slapping together the non essential stuff. It still has no AC but I now have all the parts. I originally tried to use the core support that was on there but ended up finding one in great shape near me so I got that instead. Helped line everything up much better. My radiator, condensor, AC lines, battery box in that corner were damaged, the fan blade was broken, but the clutch was ok.

All parts were sourced on MUD or car-part.com. still not perfect, but it gets me from point A to point B
 
Last edited:
The good thing about this truck is that the whole front end is bolt on. So you can just get the inner fender, and a radiator core support, and start bolting things back together. Knock the front frame horn back into place if it moved too much and get her back on the road.
Here is mine, its how I got it in december from my brother.


Here is the replacement inner fender after I rattle canned it semi gloss black.

Then testing the hood and stuff.

And how she sits now 5 months later

I did everything to get it driveable in about 4 days. Then started slapping together the non essential stuff. It still has no AC but I now have all the parts. I originally tried to use the core support that was on there but ended up finding one in great shape near me so I got that instead. Helped line everything up much better. My radiator, condensor, AC lines, battery box in that corner were damaged, the fan blade was broken, but the clutch was ok.

All parts were sourced on MUD or car-part.com. still not perfect, but it gets me from point A to point B


I hate when my brother does s*** like that! :bang:
 
IMG_0714.webp
Going through the same thing right now. It must be an epidemic...Hood, grill, core support, corner lights, fender, & valance are all standing by. I'll pickup the headlights tomorrow. Still need a radiator & a inner fender.
 
What radiator are you guys buying? Pre-95's are NLA from the dealer. I need a new one and I'm looking for best quality at a moderate price point.
 
I did a napa one because it was in stock when I was fixing it all. If it busts early i will do a oem one if they are still available. My truck is a 96.
 
Back
Top Bottom