Alignment Specs for 79 FJ40

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 10, 2010
Threads
98
Messages
1,235
Location
Grand Rapids, MI
Hey guys,

I need alignment specs for my 79 FJ40.
 
buy a fsm or take your truck to an alignment shop.

Only toe-in and caster are adjustable with the latter set with shims between the springpak and axle. Most want caster ~+3-5* (+1* stock) and 3/16" toe-in.

Plenty of threads of people having gone through this if you are inclined to look.
 
Camber 0.75-1.25 deg
Caster 0.75-1.25 deg
Toe 0.02"

This is from the printout at the alignment shop. IMO, if you have lots of caster, you can go with 1/8" toe, not .25". My alignment guy does it this way.
 
Caster Problem/Question.. 1976 FJ40. Here's the specs from the alignment shop. Backstory. Previous owner had shackles built, I'm not sure of the additional length.. probably 1"ish. I guessed (I know) at a 4* shim to try to get the caster right, because it had a really bad wander in the steering. Wandering fixed w/ the 4* shims.. but now I have a death wobble at 30mph. I assumed the caster was bad, but these numbers look like they are close to specs.. Any ideas at all? I know the tie rod ends are bad, but i didn't have any of the wobble until I shimmed the front.
FL Camber .3*. Caster 2.3*.
FR Camber .3*. Caster 2.5*.
 
Back
Top Bottom