Aftermarket AC

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 30, 2019
Threads
6
Messages
40
Location
Montpelier, Virginia
Hey all...I am new to the forum so pardon me if I'm in the wrong section, but at least it's a start. My question involves aftermarket AC and heat. I am interested in a 66 FJ 40 with a small block chevy 350/TH350. The truck has lots of potential. However, it has no air or heat. Vintage Air have kits for FJ 40s but only fit from 68 on. I am not an expert on the differences between the years, especially a difference that would render an AC unit note usable. Does anyone have any experience with this I might draw from? I saw a "universal" ac/heat kit on Vintage Ac site, but not sure if that'd work either. Thank you all in advance....
 
Pretty sure by 66 all US market FJ40s had a front heater from the factory. Is it possible this is a 65 titled as a 66? Is there a vent in the bottom of the windshield frame? If it had a heater before might be easiest to just add a factory heater for the heat part. Any kit made to add A/C to a FJ40 probably has a bracket to mount the compressor to a F or 2F Toyota engine. This may be something to piece together.
 
This truck was heavily modded but the frame and body are excellent as is the drive train. But they removed the heater way back when doing their mods.

72469103_10215541881169597_2727456579744956416_n.webp


74449337_716790302160706_5299424442747715584_n.webp
 
If you look on the firewall under where the glove box is you will see what I think is silver piece of metal where the heater was bolted to the outside of the firewall. Should be a louver on the right side of the cowl that have been for outside air. Vehicle look pretty heavily modified not sure would even try to go back with a stock heater. If you go with a A/C heater combo and has a option for outside air would run a duct from the side cowl vent thru the blank off plate on the firewall to the outside air hook up on the unit. Defrost generally works better with less humid air from out side.
 
I am attaching another picture showing what I think is that fresh air vent you mentioned. I would sure hate to buy this thing then not be able to make the ac/heat work. He has put a lot of money into it over a 8 year period, I think there's a lot to work with. Thanks for all of your help!

73346460_408803800073953_2206369097032138752_n.webp
 
By the angle of the louver I would guess the it was made in the second half of 65. Doesn't mean anything funny with the title.

V8 reverse shackle are not my thing but that is a personal choice. Diamond on the other hand to most throws up a red flag as to what is underneath. Diamond plate has been know to cover rust and many including myself wouldn't buy it for that reason alone. Rear sill and under the door rocker panel are know areas for rust on a FJ40. If it has rust cutting out and replacing it with metal panels that are available is the correct way to repair it. Diamond plate just covers it.
 
I've seen the issues with the diamond plate. I asked him and he swears its solid and that was a personal preference so I challenged him to remove them for inspection and he has agreed. So we will see. I'll attach a few more pics just so you have reference. I have been waffling on it, but it's intriguing. Long drive up to see it. The blue paint on the frame is Imron. The red textured paint in the tub is Herculeon. He fabricates air craft for a living, so you see a lot of aluminum parts he made, like the 14 gallon fuel tank. All the wiring is aircraft, as are most of the switches. He made the bumpers, the rear being aluminum. To my eye it's pretty clean but I am wide open to opinions as I am definitely a newcomer to this. Thought you might enjoy the pics regardless. Thanks

71673110_10215541881889615_7929427003365654528_n.webp


71770071_410758972921593_5583610626153906176_n.webp


72578592_501752564005158_3055858725613993984_n.webp


72873436_1359217460913860_2407169242005766144_n.webp


73381332_1488717177933136_1213705230399569920_n.webp
 
Nothing to add on the a/c but if that 40 is orange in color I think I saw it in person back in Telico, years ago. I saw the Broken Birfield sticker and then saw the exhaust. The story all lines up with the airplane mechanic too. It was a very clean truck.

BTW, I am in Richmond if you need any help or have questions.

Rob

just noticed it is RED, wrong truck...
 
I've been looking at some options for a restomod 1967 I have, which has a SBC conversion. I wouldn't get the FJ40 kit, as a big part will be the motor mounting brackets which won't work on the SBC. My understanding is that the inside mounting points are different because of a wider glove box on the pre-68. Not hard to overcome. But, as custom as yours is, the universal may not need any more adaptation. I believe the Vintage air set-up goes through the passenger side firewall right where your ignition (I think, silver with the little fan) unit is.
 
is there a roof? heat or a/c won't do much good without one.
interesting exhaust routing.
what are you going to be doing with the rig?
 
is there a roof? heat or a/c won't do much good without one.
interesting exhaust routing.
what are you going to be doing with the rig?


I was thinking with all the exposed exhaust pipe under the hood that between that and all the exhaust under the floor unless it firewall and floor are well insulated not having a heater will not be a problem. Have too much heat very well may be a issue.
 
I've been looking at some options for a restomod 1967 I have, which has a SBC conversion. I wouldn't get the FJ40 kit, as a big part will be the motor mounting brackets which won't work on the SBC. My understanding is that the inside mounting points are different because of a wider glove box on the pre-68. Not hard to overcome. But, as custom as yours is, the universal may not need any more adaptation. I believe the Vintage air set-up goes through the passenger side firewall right where your ignition (I think, silver with the little fan) unit is.
Actually, that is a transmission cooler from a Cesna aircraft on the firewall. This guy works fabricating airplane parts.
 
is there a roof? heat or a/c won't do much good without one.
interesting exhaust routing.
what are you going to be doing with the rig?
It has a full soft top (Best top) that's almost new. This is purely a weekend run to the lake rig. But the wife has some allergies, so would be good to have the AC option.
 
I was thinking with all the exposed exhaust pipe under the hood that between that and all the exhaust under the floor unless it firewall and floor are well insulated not having a heater will not be a problem. Have too much heat very well may be a issue.
Also, with the exhaust dumping out right by the door, may need oxygen masks.
 
Having installed a Vintage Air in my 40 a while back, I can tell you that you are going to run into fitment issues with the way your dash has been modified. It won't be bolt in for sure.

You may want to look at Restomod Air or one of the others people have used here. The Restomod Air unit will go where the heater normally goes.
 
Also, with the exhaust dumping out right by the door, may need oxygen masks.


I was thinking ear plugs, with the headers and all.
 
Back
Top Bottom