Parting Out 90 FJ62 Complete Truck (Washington DC)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Sorry FJ Moneypit.. that has been sold. Must have been a hot item as I sold it quickly when I started the part-out.. lots of requests for it.

Good luck in your search!
 
Converting fj40 to power steering. Looking for pump, reservoir and bracket to mount to passenger side so I can retain my oem air box on the driver side. A fj62 bolt pattern appears to be the same as the bolt holes on the 2F head.
 
Still a few good parts. List on first page (in Bold) is everything I have left and updated as parts get shipped.

Karl
 
Do you still have those two center dash vent covers left? What color are they? Also the auto transmission shifter head?
 
Hey Spanto, I do not have the vents anymore... but let me check and see if I have the shift left.. I cannot recall what I did with that but I am pretty sure that is gone as well.
 
Spanto, sorry for the delay. I looked and I cannot find the shift lever, someone must have picked it up at some point. Best of luck in your search.
 
Bump for some good parts.

-All glass except the windshield and rear hatch (would prefer not to ship these)
-EFI intake manifold
-Speedometer
-Clock
-CEL
-Rear windshield wiper fluid bag
-Rear cargo tie downs
-Intake cooler blower
-Clear marker light covers
-Varying emissions stuff
-Cargo area metal trim
-Foot rest
-Rear exterior vent things
-4wd shift boot
-Parking break lever
-O-S*it handles
-4wd high button
-Power mirror controls
-Dash blanks
-Dash light dimmer
 
Last edited:
Updated list and a bump
 
Hey Seth, the Chassis was one of the main reasons the part out happened. It was rotten from front to back. some sections were salvaged and passed on to other cruisers but mostly became scrap.

Good luck in your search!
 
Good morning,

I am looking for the upper yoke that mounts to the steering intermediate shaft. It mounts to the shaft via splines and attaches to the spider (universal) at the fire wall. I'll take the whole shaft with both universal set ups to if that is easier for you. The lower portion of the shaft attaches to the steering box via splines.

Thanks
Stan


Mine is split in half, over stressed it taking it apart, cast metal
61666660_2479867235377486_5748838383103246336_n.jpg

61725590_2479867332044143_3601121312220643328_n.jpg
 
Hey NCFJ, no sorry that is long gone. Best of luck in getting another one.
 
no, sorry. doors are gone.
 
bump, bump, bump
 
Good morning,

I am looking for the upper yoke that mounts to the steering intermediate shaft. It mounts to the shaft via splines and attaches to the spider (universal) at the fire wall. I'll take the whole shaft with both universal set ups to if that is easier for you. The lower portion of the shaft attaches to the steering box via splines.

Thanks
Stan


Mine is split in half, over stressed it taking it apart, cast metal
61666660_2479867235377486_5748838383103246336_n.jpg

61725590_2479867332044143_3601121312220643328_n.jpg
Isn't this the same as a early Toyota Corolla driveshaft u-joint? I have read this many times, but not paid attention to the specifics.
 
Back
Top Bottom