3FE-with 315s

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 8, 2011
Threads
23
Messages
245
Location
Montana
New to the 80 forum been a 100 series for over 9 years now. Found a really clean 1991 80 that I'm thinking about purchasing. The current owner just bought it and put 4in OME lift with camber correction plates, new front ARB as well as rear ARB with tire carrier and 35' BFG KM2 tires....

Found out his wife is pregnant and his new toy must go.

I know my 100 series would handle the weight and tires decently but don't know much about the 3fe in the 80 series.

Is this too much for this motor without re gearing?

Is the tranny built to handle this stock?

Did some searches but couldn't find the answer to my question, all input is appreciated.

Thanks!
 
33s are fine on stock gearing, but I regeared before going to 35s on my 1992. I can't imagine ever getting out of 3rd gear if you kept stock gears with 35s.

Transmission is fine.
 
Thanks, so 35's on stock gearing wouldn't be the best option. How much am I looking at to re gear? Don't really have the time to do it myself. Owner is asking 9900. I figure offering that minus cost of doing this is reasonable?
 
9900 gets you a built 100 series here. What all is done to it? For that much cash I expect less than 100k miles with a ton of additions.
 
Thanks, so 35's on stock gearing wouldn't be the best option. How much am I looking at to re gear? Don't really have the time to do it myself. Owner is asking 9900. I figure offering that minus cost of doing this is reasonable?

I called around to find a good price at a reputable shop, and quite a few wanted $300 a diff to install the gears if I brought them just the third members. I ended up finding a shop that quoted me $200 a diff, and went with them because they seemed to do a lot of dealer repairs and had a high rating online. Depending on how many miles the truck has, you might be able to save money by going with the mini install kit vs the bigger more expensive one. My rear diff had 350,000 ish miles on it, and my front had about half of that, and the shop didn't think it would be necessary to get the master install kit for the front.

I had always been scared by the cost and benefit of gears, but in the end it was totally worth it. It took a day to pull the 3rd members and then I took them to a shop 120 miles away and they put them in within several hours. Then I took them back home and put them in later that day.

All has been perfect for roughly 15,000 miles with no whine from the gears.

All in it was about a grand.
 
I would regear. I paid $1100.00 for 529's front and rear total
 
I had 35s on my old stock fj80, it wasn't that bad.
 
Well, I think I'm going to pass on it as I found a low mile 95 FZJ. Here is the link, I've talked to the guy one time. Not a penny under 9900 either.
Toyota Land Cuiser
 
I have 315's on my stock 91 and it goes down the road well enough but as stated before it doesn't like to get out of third gear at highway speed.

that is a LOT for a 91 IMO. You could probably track down a LX450 or a FZJ80 with lockers for that kind of money.
 
Same here... I run some 315 on 35's with stock gears and I go back and forth between San Francisco Bay and Mt Shasta without probs. I'm gonna re-gear once I add front & rear bumpers + roof tent + full expedition gear for 7-10 days. Until then, it's all good really.

I even manage to get close to 14mpg on freeway :D
 
There is some weight on that rig, F and R bumpers.... Still seems like 9900 is a bit high.
 
same here, running 35's on stock gears with no problem at all. I drive my Tacoma if i want to go fast.
 
Well, I think I'm going to pass on it as I found a low mile 95 FZJ. Here is the link, I've talked to the guy one time. Not a penny under 9900 either.
Toyota Land Cuiser

I don't think there is anyone that loves the 91-92 3F-E more than me. Having said that, $10k is a lot of damn money. Especially for a burgundy rig. Blech.

Dude is probably trying to break even, retail, after spending $7700 on "add ons".

Nice rig. Wouldn't spend $10k on it.
 
Thanks for the input, I totaled my 100 series a week before xmas. Kind of a sad day but the truck saved my life. I was in a head on collision with a Dodge duly 3500 towing a skid steer. My Land Cruiser saved my life, the entire front end was completely gone. Ive always loved all of my cruisers but this one saved me. I want to buy a solid rig.

Friends don't get it, but its the best, safest vehicle on the road.
 
Not sure where the market is up your way, but a solid 80 series, 95-97 shouldn't set you back more than $5-$7k IMO. Bolt-ons are only worth the money if they are what you are looking for. A $10k 91 better be under 50k miles and look like it just rolled off the showroom floor. I know the market is different and availability is going to dictate pricing, but for the $$ it sounds like they are floating, I'd look around outside your area so you don't get hit too hard. Also, coming from the 100, I'd stay away from the 3FE trucks. Don't get me wrong I have 2 going on 3 of them and I love mine, but I started there and know what I have. In the mountains or on grade the 3FE and 35s on stock gears might push you to the brink. It felt like Mine would drop down to 1st gear when pulling a long steady grade. I went to 5.29s and for my use, it's peefect, but if you're looking to drive it daily, 4.88s are probably a better fit.

That all said, unless you had an 80 or just really want the 80, the 100 is a solid platform and for the $$ you are quoting for 80s, you are close to 100 series money, at least down this way.

Good luck and I hate to hear about your 100, but glad you are safe.
 
Back
Top Bottom