3D mats, any opinions/interest in the 100 series community
- Thread starter Dutch178
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
GTV
SILVER Star
Agreed. They fit great in the Sequoia I had. 100 is p!ss poor.
I think I talked to 3d when I was looking for mats (still looking) and they needed a minimum run of 250 to setup a new the new parts.
I never thought I could get to 250 so I didn't post it up here.
I'll disagree on the Weathertech options, the ones we've have in multiple Lexus vehicles have been perfect but I never found a set for the LX. Have them in mulitple GX, RX, ES, etc. They have greatly improved over the years, the latest floor liners fit about as well as the carpet they sit on.
Maybe the LC/LX scans are just old and never updated to match the new manufacturing updates.
I never thought I could get to 250 so I didn't post it up here.
I'll disagree on the Weathertech options, the ones we've have in multiple Lexus vehicles have been perfect but I never found a set for the LX. Have them in mulitple GX, RX, ES, etc. They have greatly improved over the years, the latest floor liners fit about as well as the carpet they sit on.
Maybe the LC/LX scans are just old and never updated to match the new manufacturing updates.
@JBerger which WeatherTech mats are you referring to? The ones I've had - the "Laser Fit"? - are pretty bad. But @LJE posted a pic of WT's other style that seems to fit well. My Laser Fit WTs were strange - the driver side fit great, damn near perfect. But the passenger side was way off. WT sent a new set and they were same.
The other thing about the Laser Fit mats is the thin sides - they curl in pretty quickly and look cheap.
The Lloyds work well. They're thick but flexible, kinda floppy so they conform and lie flat.
The other thing about the Laser Fit mats is the thin sides - they curl in pretty quickly and look cheap.
The Lloyds work well. They're thick but flexible, kinda floppy so they conform and lie flat.
Looking at that Lloyd, and considering it's simplicity, isn't the same as getting a roll of rubber mat and cutting to size? I got a 3rd row seat on passenger side and no seat on driver's, so paying $115+tax and s&h for a plastic or rubber flat mat that won't fit properly on one of it's sides seems no good, but I believe you can buy a roll of this material, probably at same cost, that will be big enough for all the mats cut outs. Thoughts?
btw, i have same type of mat taken from a Tesla that we had at work, and it fitted almost perfect on the fronts.. free too!
btw, i have same type of mat taken from a Tesla that we had at work, and it fitted almost perfect on the fronts.. free too!
Something appears to have changed for the better with their shipping. These only come up about $25 more than whole car of weathertechs, and that’s with weathertechs on sale.I’ve come really close to ordering these but shipping is pretty steep.
Toyota Land Cruiser LC100 Black 3D Floor Liner Mat
Upgrade your Toyota Land Cruiser 100 Series with the LX470 Beige 3D Floor Liner Mat. High-Density Tri-Extruded material, perfect fit, and advanced protection. Shop now at AkiOverland for absolute interior protection!www.akioverland.com
Tariffs might apply to
You might also have to apply tariff charges to these. Looks like the company is out of Malaysia. I do like these though. Much better looking than the weathertechs.
I'd love to find a "bulk" source for that same mat. If you find one, please (!) share it. I bought all three rows, so having the 3rd row match was an incentive to not go rogue on the source/style. But since then, I started playing with a project that might be better if I could find a source of that mat.
- Thread starter
- #29
JBerger,
Yeah they told me 200 sets, but I don't actually have a contact name there, the CS replies never have names.
I have also started this conversation with 3W, mainly because their products look very similar. Hoping we how enough interest here that ONE or both of these companies see how underserved the LC/LX community is in this aspect, and get to it.
I have seen makers chime in on this post, maybe a few of them could express the need better than I am currently able to, and could get this boat off the sandbar?
If this is how snug fit it would look like for the front, 2nd and 3rd row of the 100 I’ll be interested in getting a full set.
- Thread starter
- #32
Same, but as the saying goes."If you never ask, the answer is ALWAYS No."
I still have the carepet mats in my truck because every time I go to look for a good replacement I can't find one that is good enough to justify the cost. My mats are getting pretty bad, though and I would pony for a good set that fits well. PLEASE make this happen.
There are better than OEM carpet mats made by folks already here in the forum, I'd just like a set of great muck mats that are similar to the new weather tech floor liners or the 3d mats.
Really?! Who?
@Tupelo Honey
The master thread for replacement carpets and mats is above.
The master thread for replacement carpets and mats is above.
I love 3d mats and have had them in every car but my LX. I will buy a front set of you make it happen.
- Thread starter
- #39
Agreed, when looking for carpet replacement, but not all-weather mats as discussed here.@Tupelo Honey
The master thread for replacement carpets and mats is above.
Dutch, that post about carpet was in response to Coin's ask.