Any ideas on what component or components may have failed causing pieces of brass bushing or parts to end up in oil pan?
1fzfe brass
- Thread starter FJDobie1
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
Pictures? I believe the oil pump has a brass sleeve or bushing.
Looks like this
- Thread starter
- #4
Was thinking the same , checked that and didn’t see anything out of the ordinary.? I can work on getting some pics.
- Thread starter
- #5
Seeing that you can order this aftermarket. Is this a common failure point?
Only two places in the world to get that oil pump bushing. The good news Toyota gives it to you for free...with the purchase of a new short block.
Or you can get it here:
Or you can get it here:
Last edited:
I remember that being the hold up for the machine shop that built my engine. took them a month to find it. I can't think of anything else brass that could get in the oil pan.Only two places in the world to get that oil pump bushing. The good news Toyota gives it to you for free...with the purchase of a new short block.
Or you can it here:
- Thread starter
- #8
Thank you
Sounds like wit's end no longer has them. But I hear a gentlemen( land tanks) is selling them. Anyone have a leed on how to get a hold of him ?
Thank you
Thank you
Send me a pm and I’ll help you out with getting one.
Hello
Thank you for the reply, how do I go about ordering 1 ?
Galloway engines in Australia also sells them for about $30.
Select his name from his Avatar on his reply to you.
Then select "start a conversation".
Then your message will be sent directly to him and the rest of us will not see it.
That bushing is missing a oil groove that is present in the factory bushing.Galloway engines in Australia also sells them for about $30.