1993 PZJ75 8'' HP & 9.5'' FJ40 front smaller knuckle arms diff

Joined
Sep 25, 2011
Messages
88
Location
Nicosia, Cyprus
Can I swap the knuckles/disks/hubs from the 8'' HP over to the 9.5'' FJ40 front diff with the smaller knuckles arms?
 

Guu

Joined
May 12, 2016
Messages
77
Location
Groote Eylandt
I wanted to do this the other way and was told i couldn't :(

I think they have different sized splines or something to do with the inner axles. So you either have to go full 9.5" or full 8"
 
Joined
Sep 25, 2011
Messages
88
Location
Nicosia, Cyprus
Just teared down everything and turns out the knuckles are 10mm or so bigger. So they wont fit. I can however use mini kmickles, pzj75 arms, vented rotors and 4x caliper

So now i am after a set of 70 9.5'' bare knuckles
 
Top Bottom