1977 Exhaust

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 5, 2018
Threads
32
Messages
105
Location
Boston
I'm headed over to a custom exhaust place over the next few days to get a new system. My 77 came with no muffler and pipe, just the down pipe from the manifold.

The skid plate is not fitted yet over transmission/transfer case, and I intend to take that with me to the shop.

Does the stock routing run through the center of the car underneath the skid plate and between the frame rails?

Does anyone have an pics?

Help appreciated.
 
It's run along the driver's side of the skidplate, but has to be run in such a way that you can wiggle the skidplate out from being 'trapped' by the pipe. Definitely bring your skidplate to the exhaust shop to test fit.

The good news is that having the pipe located there makes it easier to re-install the skidplate. To reinstall, you 'hang' the driver's side edge of the skidplate on the exh. pipe on the driver's side, then insert a few pass. side bolts, then go around to the driver's side and lift it up and install the bolts there.

I would not run the pipe above the skidplate for heat reasons. The notch in the skidplate that 'looks right for exhaust' is actually for the PTO winch driveshaft.
 
Back
Top Bottom